Acura MDX Keyless Access 2015 Manual
![Acura MDX Keyless Access 2015 SUV manual cover](/images/EFXpTrlUwPpbgJsnnwiqbvmr/thumbs/thumb175x175.webp)
If the keyless entry system is not functioning, use the physical key inside the key fob to unlock the driver's door.
Replace the battery in the key fob with a new CR2032 battery. Open the fob, remove the old battery, and insert the new one, ensuring the positive side is facing up.
To start the vehicle, press the brake pedal and hold the key fob close to the start button. Then, press the start button with the key fob while holding it close.
Possible reasons include a low battery in the key fob, interference from other electronics, or the key fob being out of range. Try replacing the battery or moving the key fob closer to the vehicle.
Programming a new key fob requires specialized equipment and should be done by an authorized Acura dealer or a professional locksmith.
The keyless entry system typically works within a range of about 32 inches (80 cm) from the doors and trunk.
The vehicle is designed to prevent locking the key fob inside. If the key fob is detected inside, the doors will not lock.
To disable the keyless entry system, you must remove the battery from the key fob or consult the owner's manual for specific vehicle settings.
Check the key fob's battery and replace it if necessary. If the issue persists, consult with an Acura technician for further diagnosis.
Regularly check and replace the key fob battery, keep the key fob away from water and extreme temperatures, and ensure the vehicle's battery is in good condition.