Acura ILX Wiper Control 2019 Manual
![Acura ILX Wiper Control 2019 Sedan manual cover](/images/PeYqYViMIlZUfdnKAicSrHux/thumbs/thumb175x175.webp)
To activate the rain-sensing wipers, ensure the wiper control lever is in the 'Auto' position. The wipers will adjust their speed based on the amount of rainfall detected on the windshield.
Check if the wiper fuse is blown and replace it if necessary. Ensure the wiper control lever is not set to 'Off'. If the issue persists, consult a technician for a potential motor or electrical problem.
You can adjust the wiper speed by turning the wiper control lever. Rotate it upwards for faster speeds and downwards to slow down or turn off the wipers.
Clean the wiper blades and windshield with a glass cleaner. If streaks persist, consider replacing the wiper blades as they might be worn out.
Lift the wiper arm off the windshield. Press the tab on the blade and slide it off the arm. Attach the new blade and ensure it clicks securely into place before lowering the arm back onto the windshield.
Yes, but ensure that the blades are not frozen to the windshield before activating them. Use a de-icer or scraper to free them if necessary.
The 2019 Acura ILX typically uses a 26-inch blade on the driver's side and a 16-inch blade on the passenger's side. Always verify with your vehicle manual or a parts specialist.
The 2019 Acura ILX does not come equipped with a rear wiper as it is a sedan. Rear wipers are typically found on hatchbacks and SUVs.
Noise can be caused by worn-out blades, dirt on the windshield, or improper installation. Clean both the windshield and blades, and replace the blades if necessary.
It is recommended to replace the wiper blades every 6 to 12 months, depending on usage and weather conditions. Regular inspection for wear and tear can help determine the right time for replacement.