Acura ILX Tire Pressure Monitoring System 2018 Manual
![Acura ILX Tire Pressure Monitoring System 2018 Sedan manual cover](/images/LAYaMcoNQEuFlWcZiAzhkmbz/thumbs/thumb175x175.webp)
To reset the TPMS on your 2018 Acura ILX, turn the ignition to the ON position, without starting the engine. Press and hold the TPMS button located under the dashboard on the driver's side until the TPMS indicator blinks twice. This indicates that the system has been reset.
If the TPMS warning light stays on after inflating your tires to the recommended pressure, drive the vehicle for a few minutes at speeds above 20 mph to allow the system to re-check the tire pressures. If the light remains on, there may be a malfunction in the system, and you should have it checked by a technician.
Using a different type of tire that does not meet the recommended specifications for your Acura ILX can affect the TPMS. It's important to use tires that are compatible with the TPMS sensors to ensure accurate readings and optimal system performance.
Cold weather can cause the air in the tires to contract, resulting in lower tire pressure. This may trigger the TPMS light. It is important to regularly check and adjust your tire pressure during colder months to ensure safe driving conditions.
The recommended tire pressure for the 2018 Acura ILX is typically listed on a sticker located on the driver’s side door jamb. It usually ranges around 32-35 psi for both front and rear tires, but it's important to check the specific recommendations for your vehicle.
It's advisable to check your tire pressure at least once a month and before long trips to ensure optimal performance and safety. Regular checks can help maintain fuel efficiency and extend tire life.
Driving with the TPMS light on is not recommended as it indicates that one or more tires may be under-inflated, which can lead to poor handling, reduced fuel efficiency, and increased tire wear. Check and adjust the tire pressures as soon as possible.
Yes, a TPMS sensor can be replaced individually if it fails. It's important to ensure that the new sensor is compatible with your Acura ILX and properly programmed to sync with the vehicle’s TPMS.
Common signs of a failing TPMS sensor include an illuminated TPMS warning light that remains on even after adjusting tire pressures, inconsistent pressure readings, or error messages on the dashboard.
To improve the lifespan of your TPMS sensors, regularly maintain proper tire pressure, avoid using tire sealants, and perform routine checks as recommended by your vehicle's maintenance schedule. Proper handling during tire changes can also prevent sensor damage.