Acura ILX Tech Multi-Information Display 2015 Manual
![Acura ILX Tech Multi-Information Display 2015 Sedan manual cover](/images/ZtRbKRxveNsnHMYBSavWscfZ/thumbs/thumb175x175.webp)
To reset the Multi-Information Display, press and hold the "SEL/RESET" button until the screen resets. This button is typically located on the steering wheel or dashboard.
Ensure that the vehicle is on a flat surface and that the tires are properly inflated. Also, check if the display is set to the correct trip setting which shows fuel economy data.
Yes, you can customize the display settings by navigating to the settings menu through the "INFO" button. From there, adjust the display information to your preference.
Check if the display brightness is turned down or if the display is turned off. If neither is the case, inspect the vehicle's fuses related to the display system.
To update the navigation system, visit the Acura website to purchase the latest map updates. Follow the instructions provided to install the updates via USB or SD card.
Temperature readings can be affected by the vehicle's position, such as direct sunlight or being near a heat source. If inaccuracies persist, the temperature sensor may need inspection.
Access the settings menu from the Multi-Information Display and select Units. Choose between miles or kilometers as your preferred unit of measurement.
Use a soft, microfiber cloth slightly dampened with water or a screen cleaner. Avoid using abrasive materials or cleaners with ammonia.
Yes, the display can show certain diagnostic information such as tire pressure status and maintenance reminders, accessible via the "INFO" or "MENU" button.
Press the "Phone" button, then select "Yes" to pair a new device. Follow the on-screen prompts to enable Bluetooth on your device and select your Acura from the list.