Acura ILX SiriusXM 2020 Manual

To activate SiriusXM, turn on your radio and tune to channel 1. Locate the Radio ID by pressing the 'Menu' button and navigating to the 'Settings' option. Select 'SiriusXM' and then 'Radio ID'. Call SiriusXM or go online to their website to activate your subscription using your Radio ID.
If there is no signal, ensure your vehicle is outdoors with a clear view of the sky. Check that the antenna is not obstructed or damaged. If the issue persists, try resetting the SiriusXM radio by removing the fuse or disconnecting the battery for a few minutes.
To reset the SiriusXM radio, you can perform a soft reset by turning the radio off and then on again. For a hard reset, remove the radio fuse from the fuse box under the hood or disconnect the battery for a few minutes before reconnecting it.
Yes, you can transfer your SiriusXM subscription. Contact SiriusXM customer service with your account details and the Radio ID of your new Acura ILX. They will assist you with the transfer.
To update the channel lineup, tune to channel 0 and wait for the radio to receive the update signal. This might take a few minutes. Make sure your vehicle is in an open area with a clear view of the sky.
To improve signal reception, ensure that the antenna is not obstructed. Avoid parking in covered areas or near tall buildings. You may also try relocating the antenna if it is aftermarket or checking for any damages.
Check the volume settings first. Ensure that the audio source is set to SiriusXM. If the issue persists, verify that the SiriusXM antenna is properly connected and not damaged. A soft reset of the radio might also resolve audio issues.
To cancel your SiriusXM subscription, contact SiriusXM customer service by phone. Provide them with your account details and request cancellation. Make sure to confirm cancellation terms and any possible fees.
SiriusXM itself does not require software updates. However, ensure that your vehicle's infotainment system is up-to-date by checking Acura's website or contacting your dealer for any available updates that might enhance SiriusXM functionality.
To change presets, tune to the desired SiriusXM channel, then press and hold the desired preset button on the radio until you hear a beep, indicating that the preset has been saved. Repeat this process for other presets as needed.