Acura ILX Multi-View Rear Camera 2018 Manual

To activate the Multi-View Rear Camera, shift the vehicle into reverse gear. The camera will automatically display the rear view on the infotainment screen.
The Multi-View Rear Camera provides three viewing modes: Normal View, Wide View, and Top-Down View. You can switch between these modes using the on-screen buttons.
If the rear camera display is not working, check the following: ensure the vehicle is in reverse, verify that the display settings are correctly configured, and inspect the camera lens for any obstructions or dirt.
If the camera image is blurry, clean the camera lens with a soft, damp cloth to remove any dirt or debris. Ensure there are no smudges or streaks on the lens.
No, the Multi-View Rear Camera is designed to activate only when the vehicle is in reverse. It will not display views while driving forward.
Yes, the brightness and contrast of the rear camera display can be adjusted through the vehicle's infotainment system settings. Refer to the owner’s manual for detailed instructions.
Inspect the camera for physical obstructions such as dirt, snow, or ice. Clean the lens gently. Unusual colors might indicate a need for professional service or calibration.
To switch between different camera views, use the on-screen buttons that appear when the vehicle is in reverse. Each button corresponds to a different view mode.
Yes, the camera displays dynamic guidelines on the screen to assist with parking. These guidelines change direction according to the steering angle.
It is recommended to clean the camera lens regularly, especially after driving in harsh weather conditions or through muddy areas, to maintain optimal visibility and performance.