Acura ILX Door Locks 2020 Manual
![Acura ILX Door Locks 2020 Sedan manual cover](/images/pcmeCOznjjIDQTzqsJvkUNaM/thumbs/thumb175x175.webp)
To manually lock or unlock the doors, use the key fob or the physical key located inside the key fob. Insert the key into the driver's side door lock and turn it to lock or unlock the vehicle.
First, check the key fob battery and replace it if necessary. If the battery is fine, try resetting the key fob by holding the lock and unlock buttons simultaneously for several seconds. If the problem persists, consult an Acura technician.
Automatic door locking can be enabled through the vehicle's settings menu. Access the settings via the infotainment system, navigate to 'Vehicle Settings', and select 'Door Setup' to configure automatic locking.
If the passenger door won't lock, it could be due to a faulty actuator or a blown fuse. Check the fuse box for any blown fuses and replace them as necessary. If the issue persists, the door lock actuator may need to be inspected or replaced.
To disable the walk-away auto lock feature, go to the vehicle's settings menu on the infotainment system, select 'Vehicle Settings', then 'Door Setup', and turn off the 'Walk-Away Auto Lock' option.
Continuous cycling of door locks could be caused by a malfunction in the door lock actuator or an electrical issue such as a short circuit. It is recommended to have the vehicle inspected by a professional to diagnose the problem.
To reset the door lock system, disconnect the vehicle battery for a few minutes and then reconnect it. This may reset the system. If issues persist, consult an Acura service center for further assistance.
Yes, you can unlock all doors at once by pressing the unlock button on the key fob twice or by setting the vehicle to unlock all doors in the 'Door Setup' menu via the infotainment system.
To troubleshoot a door lock actuator, listen for noise when locking/unlocking the doors to ensure the actuator is engaging. Check the wiring and connections for any visible issues. If necessary, test the actuator with a multimeter to ensure it is receiving power.
Regularly clean the door locks and lubricate them with a silicone-based spray to ensure smooth operation. Inspect the key fob battery and replace it as needed. Periodically check the door lock actuators for signs of wear or failure.