Acura ILX AcuraWatch 2021 Manual
![Acura ILX AcuraWatch 2021 Sedan manual cover](/images/SAlNfUVNAOCpNYdZhZZaGqdw/thumbs/thumb175x175.webp)
To activate Adaptive Cruise Control, press the "MAIN" button on the steering wheel to enable the system. Then, press the "SET" button when you've reached your desired speed. You can adjust the following distance with the "RES/+ or SET/-" buttons.
If the CMBS warning light comes on, it indicates a potential issue with the system. Check if the radar sensor is obstructed by dirt or debris and clean it if necessary. If the light stays on, contact your Acura dealer for service.
You can customize the LKAS settings through the vehicle’s multi-information display. Navigate to the "Driver Assist System Setup" and select "LKAS Sensitivity" to adjust the settings according to your preferences.
To reset the TPMS, turn the ignition to the ON position without starting the engine. Press and hold the TPMS button located on the dashboard until the TPMS indicator blinks twice, indicating the system has been reset.
A regular maintenance schedule is recommended every 7,500 miles or 12 months, whichever comes first. This includes oil changes, tire rotations, and inspections of various vehicle components to ensure optimal performance.
The recommended tire pressure for the Acura ILX AcuraWatch 2021 Sedan is usually 32 psi for both front and rear tires. Always refer to the sticker on the driver’s side door jamb for the most accurate information.
To update the navigation system, you can purchase the latest map updates from the official Acura Navigation website and follow the provided instructions to install the updates using a USB flash drive.
If the BSI is not functioning, check if the sensors on the rear bumper are clean and unobstructed. Ensure the system is turned on in the vehicle settings. If problems persist, visit your Acura dealer for a diagnostic check.
Yes, the RDM system can be turned off. Locate the RDM button on the dashboard and press it to disable the system. The RDM indicator will turn off, confirming the system is deactivated.
To update the infotainment system, connect to a Wi-Fi network via the system settings. Check for updates under "System Updates" and follow the prompts to download and install the latest software version.