Acctim Rhea 22850 Operating Instructions

To set the time, press the 'set' button on the back of the clock until the hour digits flash. Use the 'adjust' button to set the correct hour and then press 'set' again to adjust the minutes.
To change the battery, remove the battery cover on the back of the clock, take out the old battery, and replace it with a new AA battery. Ensure the polarity is correct before replacing the cover.
If the clock hands do not move, check if the battery is exhausted and replace it if necessary. Also, ensure that the hands are not physically obstructed.
To reset the clock to factory settings, remove the battery and press the 'set' button for 10 seconds. Reinsert the battery to restart the clock.
Clean the clock with a soft, dry cloth. Avoid using water or cleaning solutions to prevent damage to the clock's components.
Press the 'alarm' button until the alarm time appears. Use the 'adjust' button to set the desired alarm time, then press 'alarm' again to confirm.
The ticking noise is due to the movement of the clock's mechanical parts. It's a normal sound for analog clocks and indicates the clock is functioning.
To silence the alarm, press any button on the clock or slide the alarm switch to the 'off' position.
If the clock is running slow or fast, ensure the battery is fresh and properly installed. Re-set the time using the 'set' and 'adjust' buttons as needed.
Yes, the Acctim Rhea 22850 can be hung on a wall. Ensure it is securely mounted using a suitable wall hook or screw.