Acctim Oro 60059 Operating Instructions
![Acctim Oro 60059 manual cover](/images/7dc3c35e0b82d7e222a35de8/thumbs/thumb175x175.webp)
To set the time, press the 'Mode' button until the hour digits start flashing. Use the 'Up' and 'Down' buttons to adjust the hour, then press 'Mode' again to set minutes. Once done, press 'Mode' again to confirm.
To change the battery, carefully remove the back cover of the clock. Insert a new AA battery, ensuring the correct polarity. Replace the back cover securely.
Ensure the alarm is set by pressing the 'Alarm' button to view the set time. Adjust if necessary using 'Mode' and 'Up'/'Down' buttons. Check the battery power and replace if low.
When the alarm sounds, press the 'Snooze' button on top of the clock. The alarm will pause for a few minutes before sounding again.
Yes, press the 'Light' button to toggle between different brightness settings. Choose the one that suits your preference.
To reset the clock, remove the battery and wait for a minute. Reinsert the battery, and it will reset to factory settings. You will need to set the time and alarm again.
Check if the battery is properly inserted and has sufficient charge. Replace the battery if necessary. If the problem persists, contact customer support.
Press the 'Alarm' button until the alarm time appears. Use the 'Up' and 'Down' buttons to set the desired alarm time. Press 'Alarm' again to confirm.
The ticking noise is normal for quartz movement clocks. If it is unusually loud, ensure the clock is on a stable surface away from other vibrating objects.
Use a soft, damp cloth to gently wipe the exterior. Avoid using harsh chemicals or submerging the clock in water. Dry immediately with a soft towel.