Acctim Koppen 29448 Operating Instructions
![Acctim Koppen 29448 manual cover](/images/664c346e33947711b4453528/thumbs/thumb175x175.webp)
To set the time, gently pull out the crown located on the side of the clock. Rotate the crown to adjust the hands to the desired time and then push the crown back in to secure the setting.
Ensure the battery is inserted in the correct orientation, with the positive side facing up. Check for any obstructions in the battery compartment and ensure the battery contacts are clean and making good contact.
The Acctim Koppen 29448 requires a single AA battery. It is recommended to use a high-quality alkaline battery for optimal performance.
Use a soft, dry cloth to gently wipe the surface of the clock. Avoid using water or cleaning solutions, as these can damage the clock's finish and internal components.
Check if the battery is fully charged and properly installed. A weak or dying battery can cause the second hand to skip. Replace the battery if necessary.
To set the alarm, use the alarm setting knob located at the back of the clock. Turn the knob to the desired alarm time and ensure the alarm is activated by checking the indicator.
Yes, the Acctim Koppen 29448 is designed to be wall-mounted. Use the built-in hanging mechanism on the back of the clock and ensure it is securely attached to a stable surface.
The clock may run slow or fast if the battery is low. Replace the battery with a new one. If the problem persists, the clock may require servicing by a professional.
It is recommended to replace the battery every 12 months to ensure optimal performance. However, if you notice the clock running slow or the alarm not functioning, replace the battery sooner.
The Acctim Koppen 29448 is not designed for outdoor use as it is not weather-resistant. It should be used indoors to prevent damage from moisture and temperature fluctuations.