Acctim Il Giro 15852 Operating Instructions
![Acctim Il Giro 15852 manual cover](/images/434411019b59b31de308b5ba/thumbs/thumb175x175.webp)
To set the time, press and hold the time set button until the display starts flashing. Use the hour and minute buttons to adjust the time. Press the time set button again to confirm.
Ensure the clock is placed away from any electronic devices that might cause interference. Replace the battery if it is low, and reset the time.
Remove the battery cover on the back of the clock, take out the old battery, and insert a new AA battery, ensuring the polarity is correct. Replace the battery cover.
Check that the alarm is switched to the 'on' position and the alarm time is correctly set. Ensure the volume is turned up, and the battery is not low.
Press and hold the time set button until you enter the time setting mode. Continue to press until you reach the 12/24-hour setting. Use the hour button to toggle between formats.
Use a soft, dry cloth to gently wipe the surface. Avoid using water or cleaning solutions that could damage the clock.
The Acctim Il Giro 15852 does not have a brightness adjustment feature. Ensure it is placed in an area where glare from external light sources is minimized.
Check if the battery is properly inserted and functional. If the battery is low or dead, replace it with a new one.
When the alarm sounds, press the snooze button on the top of the clock. This will silence the alarm temporarily and it will ring again after a few minutes.
Yes, you can use rechargeable AA batteries, but ensure they are fully charged to maintain optimal performance of the clock.