Acctim Elana 15762 Operating Instructions
![Acctim Elana 15762 manual cover](/images/5084c8ef4f53505c6e4def6a/thumbs/thumb175x175.webp)
To set the time, press and hold the 'Set' button until the time display flashes. Use the 'Up' and 'Down' buttons to adjust the hours and minutes. Press 'Set' again to confirm.
Remove the battery cover on the back of the clock. Replace the old battery with a new AA battery, ensuring the correct polarity. Replace the cover securely.
Ensure the alarm is activated by checking the alarm symbol is displayed. Verify the alarm time is set correctly and the battery is not depleted.
When the alarm sounds, press the 'Snooze' button on the top of the clock. The alarm will pause and ring again after a few minutes.
Use a soft, dry cloth to gently wipe the surface. Avoid using water or chemical cleaners, as these can damage the clock's finish.
To reset the clock, remove the battery for a few minutes and then reinsert it. This will restore the default settings.
Check the battery to ensure it is properly seated and not depleted. Replace it if necessary. If the problem persists, inspect the battery contacts for corrosion.
The Acctim Elana 15762 does not have an adjustable alarm volume. It is set to a standard level to ensure it wakes users effectively.
Yes, press and hold the 'Set' button to enter the settings mode. Use the 'Up' or 'Down' button to toggle between 12-hour and 24-hour formats, then press 'Set' to confirm.
Check the battery power and replace it if necessary. Ensure the clock is not exposed to direct sunlight or extreme temperatures, which can affect visibility.