Acctim Colston 36957 Operating Instructions
![Acctim Colston 36957 manual cover](/images/5755d6936c40b2999d606a28/thumbs/thumb175x175.webp)
To set the time on the Acctim Colston 36957, press and hold the 'Set' button until the time starts flashing. Use the 'Up' and 'Down' buttons to adjust the hours and minutes. Press 'Set' again to confirm.
Ensure the alarm is activated by checking that the alarm icon is displayed on the screen. Verify the volume setting is not too low and that the alarm time is correctly set.
To change the battery, open the battery compartment at the back of the clock using a screwdriver if necessary. Remove the old battery and insert a new AA battery, ensuring the positive and negative ends are correctly aligned.
Check if the battery needs replacing, as a low battery can affect display brightness. If the problem persists, try resetting the clock by removing the battery for a few minutes before reinserting it.
Ensure the clock is placed away from magnetic fields or other electronic devices that could interfere with its operation. Try resetting the clock and verifying the time settings.
To enable the snooze function, press the snooze button when the alarm sounds. The alarm will pause and sound again after the snooze interval. To disable, simply turn off the alarm.
The Acctim Colston 36957 does not have adjustable brightness settings. Ensure the clock is placed in a well-lit area for optimal visibility.
To reset to factory settings, remove the battery and wait for about 10 minutes before reinserting it. This action will clear any custom settings.
Yes, to switch between 12-hour and 24-hour formats, press and hold the 'Set' button until the settings menu appears. Navigate to the time format option using the 'Up' and 'Down' buttons.
Ensure the battery is correctly installed and fully charged. Check for any corrosion in the battery compartment and clean it if necessary. If the issue persists, try using a new battery.