Yamaha YZ85J YZ85 2018 Owner's Manual
![Yamaha YZ85J YZ85 2018 manual cover](/images/4fe5592afba5becddada0fd6/thumbs/thumb175x175.webp)
The recommended tire pressure for the Yamaha YZ85J YZ85 2018 is typically 12 psi for the front tire and 12 psi for the rear tire. Always check the manual or consult with a professional for specific conditions.
It is recommended to change the oil every 10 hours of riding or after every race. Regular oil changes ensure optimal performance and longevity of the engine.
The standard spark plug for the Yamaha YZ85J YZ85 2018 is an NGK BR10EG. Ensure the gap is set correctly at 0.7-0.8 mm.
To adjust the chain tension, loosen the axle nut, adjust the chain tensioners evenly on both sides until there is about 1.2 inches of slack, and then retighten the axle nut.
Remove the air filter from the bike, clean it with a mild detergent and water, rinse thoroughly, let it dry completely, and apply air filter oil before reinstalling.
Check the fuel supply, inspect the spark plug for wear or fouling, ensure the kill switch is off, and verify that the carburetor is clean.
Use a high-quality ethylene glycol-based coolant that is specifically designed for aluminum engines, typically a 50/50 mix with distilled water.
Locate the brake fluid reservoirs on the handlebars for the front brake and near the rear brake pedal. Ensure the fluid is between the minimum and maximum marks on the reservoir.
Thoroughly clean the bike to remove mud, check and clean the air filter, lubricate the chain, and inspect all pivot points for dirt and wear.
Refer to the owner's manual for baseline settings, then adjust the compression and rebound damping on the forks and shock. For softer terrain, reduce damping; for harder terrain, increase damping.