Yamaha YZ450FXL1 YZ450FX 2020 Owner's Manual
![Yamaha YZ450FXL1 YZ450FX 2020 manual cover](/images/a614d904a6f925bc1b8aaac8/thumbs/thumb175x175.webp)
The Yamaha YZ450FX 2020 is designed to run on unleaded gasoline with a minimum octane rating of 91.
It is recommended to change the oil every 5-10 hours of riding, depending on the conditions and intensity of use.
The recommended tire pressure for the front tire is approximately 15 psi and for the rear tire is around 15 psi, but adjust according to terrain and rider preference.
The suspension settings can be adjusted using the clickers located on the forks and shock. Refer to the owner's manual for specific adjustment guidelines based on your weight and riding conditions.
Check the fuel level, ensure the kill switch is in the correct position, inspect the spark plug, and verify the battery charge. If the problem persists, consult a professional technician.
Remove the air filter, clean it with a suitable air filter cleaner, rinse with water, dry it completely, and apply air filter oil before reinstalling.
The spark plug gap for the Yamaha YZ450FX 2020 should be set to 0.8-0.9 mm.
To adjust the chain tension, loosen the axle nut, adjust the tension using the chain adjusters on both sides, and ensure the chain has the correct amount of slack before tightening the axle nut.
Use a high-quality ethylene glycol-based coolant that is specifically designed for aluminum engines.
To reset the maintenance light, turn the ignition off, then press and hold the reset button while turning the ignition on until the light blinks and resets.