Yamaha YZ250FF 2015 Owner's Manual
![Yamaha YZ250FF 2015 manual cover](/images/246732249de3d7a5a4e82f50/thumbs/thumb175x175.webp)
The recommended engine oil for the 2015 Yamaha YZ250F is Yamalube 4-R or equivalent, with an oil capacity of approximately 1.1 liters (1.16 US qt) when changing the oil and filter.
Valve clearance should be checked and adjusted every 20 hours of riding to ensure optimal engine performance and longevity.
The chain slack should be adjusted to approximately 50-60 mm (2.0-2.4 inches) at the tightest point for proper tension.
For trail riding, consider softening the compression settings on both the front forks and rear shock. Adjust the rebound damping to your preference for a smoother ride over rough terrain.
If the bike won't start, check the fuel supply, spark plug condition, and battery charge. Ensure the kill switch is in the 'Run' position and inspect the wiring for any loose or damaged connections.
Remove the air filter and clean it with a mild detergent. Allow it to dry completely before applying a thin layer of air filter oil. Reinstall the filter carefully to avoid any gaps or misalignment.
The cylinder head bolts should be torqued to 30 Nm (22 ft-lb) in a criss-cross pattern to ensure even pressure distribution.
Check the coolant level and inspect the radiator for blockages. Ensure the cooling fan is functioning correctly and not obstructed. Additionally, verify that the thermostat is operating properly.
The recommended spark plug for the 2015 Yamaha YZ250F is the NGK CR8E or equivalent. Ensure it is gapped correctly to 0.7-0.8 mm (0.028-0.031 inch).
For off-season storage, clean the bike thoroughly, change the oil, and fill the tank with fresh fuel stabilized with a fuel additive. Store the bike in a cool, dry place and remove the battery, keeping it on a trickle charger.