Yamaha YZ125XN YZ125X 2022 Owner's Manual
![Yamaha YZ125XN YZ125X 2022 manual cover](/images/1538f1ebd09e14e70bd3b7cd/thumbs/thumb175x175.webp)
To break in your Yamaha YZ125XN YZ125X 2022, start by warming up the engine at idle for a few minutes. Then, ride the bike at varying speeds, avoiding high RPMs for the first 1-2 hours of operation. Gradually increase the engine load and RPMs over the next 5-10 hours of riding.
For softer terrain, adjust the suspension to be more compliant by decreasing the compression damping. For harder terrain, increase the compression damping for a firmer ride. Adjust rebound settings to control how fast the suspension returns to its normal position. Always make small adjustments and test ride.
Use a high-quality 2-stroke engine oil that meets JASO FC or FD standards. Yamaha recommends their own brand, but any oil meeting these specifications will suffice.
If your bike won't start, check the fuel supply, ensure the spark plug is clean and properly gapped, and verify that the carburetor is not clogged. Also, inspect the kill switch and ignition system for any faults.
Remove the air filter and gently clean it with a non-flammable solvent. Rinse it with water and allow it to dry completely. Apply air filter oil evenly before reinstalling. Regular maintenance of the air filter is crucial for optimal performance.
Inspect the spark plug every 10 hours of use and replace it if there are signs of wear or fouling. Generally, replacing it every 20-30 hours is recommended to ensure optimal performance.
For off-road riding, a tire pressure range of 12-15 psi is suitable. Adjust based on terrain, rider preference, and conditions. Lower pressure may provide better traction, while higher pressure can improve puncture resistance.
To adjust the chain tension, loosen the axle nut and adjust the chain adjusters evenly on both sides of the swingarm. Ensure the chain has about 1-1.5 inches of slack, then retighten the axle nut securely.
After a muddy ride, thoroughly wash the bike to remove mud and debris. Clean and lubricate the chain, check the air filter, and inspect the brakes for any clogs. Dry the bike completely to prevent rusting.
For off-season storage, clean the bike thoroughly, drain the fuel tank or add a fuel stabilizer, and disconnect the battery. Store the bike in a dry, cool place and cover it to protect it from dust and moisture.