Yamaha YXE70WDBJ Wolverine 2018 Owner's Manual
![Yamaha YXE70WDBJ Wolverine 2018 manual cover](/images/b0f7cb385804fc4553d517a3/thumbs/thumb175x175.webp)
Yamaha recommends using Yamalube 4W, 10W-40 for the Wolverine 2018 to ensure optimal performance and longevity.
Check the battery condition and connections, ensure the fuel is fresh and the fuel line is clear, and inspect the spark plug for wear or damage.
The air filter should be checked and cleaned every 20 hours of operation or more frequently if riding in dusty conditions. Replace it if it's damaged or heavily soiled.
The recommended tire pressure for the Wolverine 2018 is 12 psi for both front and rear tires.
Start by warming up the engine, then remove the drain plug to let the oil drain completely. Replace the oil filter, reinstall the drain plug, and fill with new oil.
Stop the vehicle immediately, allow the engine to cool, check coolant levels, and inspect for any leaks or blockages in the radiator.
Routinely check brake pads for wear, ensure brake fluid levels are adequate, and inspect brake lines for any signs of damage.
Clean the vehicle thoroughly, change the oil and filter, add fuel stabilizer, check tire pressure, and disconnect the battery.
Consult the owner's manual for specific settings, and use the adjusters to set the preload and damping according to your riding conditions and preferences.
Regularly check fluid levels, tire pressure, brake condition, and the drive belt for wear. Ensure all lights and electrical components are functioning properly.