Yamaha YFZ45YSXH, YFZ45YSSH 2017 Owner's Manual

The recommended oil type for the 2017 Yamaha YFZ45YSXH is Yamalube 10W-40 Performance All Purpose oil, which ensures the engine runs smoothly.
It's recommended to check the air filter after every 20 hours of use. Clean it if necessary, and replace it if it's damaged or excessively dirty.
Hard starting issues can be caused by a weak battery, fouled spark plug, or clogged fuel line. It's advisable to check these components and replace them if needed.
To improve braking performance, ensure the brake pads are not worn out, the brake fluid is at the correct level, and there are no leaks in the brake lines. Regular maintenance is key.
The recommended tire pressure for the Yamaha YFZ45YSXH is 4 psi for the front tires and 5 psi for the rear tires. Always check the pressure when the tires are cold.
To reset the maintenance light, turn the ignition on without starting the engine, press the select/reset button until the maintenance screen appears, then hold it for 5 seconds until it resets.
Overheating can be caused by low coolant levels, a malfunctioning thermostat, or a clogged radiator. Check each component and perform necessary maintenance.
Enhancing performance can be achieved by upgrading the exhaust system, installing a high-performance air filter, and ensuring the carburetor is tuned correctly.
To adjust the chain tension, place the ATV on a level surface, loosen the axle nut, adjust the chain tensioner to achieve the correct slack, then retighten the axle nut.
Start by checking the battery connections and ensuring the battery is fully charged. Inspect the fuses and wiring for any visible damage. Using a multimeter can help diagnose further electrical problems.