Yamaha YFZ450XZ, YFZ450XBBZ YFZ 450X 2010 Owner's Manual

The recommended oil type for the Yamaha YFZ450X 2010 is a high-quality 4-stroke engine oil with a viscosity grade of SAE 10W-40.
You should check and clean the air filter every 20 hours of use, and replace it if necessary. It's important to maintain a clean air filter to ensure optimal engine performance.
The recommended tire pressure for the front tires is 4 psi and for the rear tires is 4.5 psi. Always check the tire pressure before riding.
If experiencing starting issues, check the battery charge, inspect the spark plug for fouling, and ensure the fuel tank is not empty. Also, verify that the kill switch is in the 'on' position.
To adjust the chain tension, loosen the axle nut, adjust the chain adjusters evenly on both sides, and ensure there is about 1.2 inches of slack in the chain. Tighten the axle nut after adjustment.
To improve suspension performance, adjust the preload, compression, and rebound settings according to your riding style and terrain. Regular maintenance and inspection of the suspension components are also essential.
To winterize your YFZ450X, clean the ATV thoroughly, change the oil and filter, add fuel stabilizer to the gas tank, disconnect the battery, and store it in a dry, covered area.
Overheating can occur due to low coolant levels, a malfunctioning fan, or a clogged radiator. Check the coolant level, inspect the fan operation, and clean the radiator to resolve the issue.
To replace the spark plug, remove the seat and fuel tank to access the engine. Use a spark plug socket to remove the old plug, and install the new one with the correct gap. Reassemble the fuel tank and seat.
Regular maintenance includes oil changes every 10 hours, checking and cleaning the air filter, inspecting the brakes, lubricating the chain, and checking tire pressure. A thorough inspection of all components is advised periodically.