Yamaha YFZ450SEW YFZ 450 2007 Owner's Manual
![Yamaha YFZ450SEW YFZ 450 2007 manual cover](/images/b5bb4c0087f01feee57d5b5f/thumbs/thumb175x175.webp)
The recommended oil type for the 2007 Yamaha YFZ450SEW is 10W-40, and the oil capacity is approximately 1.95 liters (2.06 US quarts) when changing the oil and filter.
The air filter should be checked and cleaned every 20 hours of riding or more frequently in dusty conditions. Replace the air filter if it shows signs of excessive wear or damage.
The correct spark plug gap for the Yamaha YFZ450SEW is 0.6 - 0.7 mm (0.024 - 0.028 inches).
If your YFZ450SEW is having starting issues, check the battery charge, inspect the spark plug, ensure the fuel is fresh, and verify that the fuel valve is open. Also, check the starter relay and fuses.
Before each ride, check the tire pressure, inspect the brakes and throttle, and ensure the chain is properly lubricated. After each ride, clean the ATV, inspect for any loose bolts or parts, and check fluid levels.
The recommended tire pressure for the front tires is 4 psi (27.6 kPa) and for the rear tires is 4 psi (27.6 kPa). Adjust according to load and terrain.
To adjust the chain tension, first loosen the axle nut, then adjust the chain tensioner bolts evenly on both sides until the desired tension is achieved (approximately 1-1.5 inches of slack), and finally retighten the axle nut.
To check the coolant level, ensure the engine is cool, remove the radiator cap, and verify that the coolant is at the top of the radiator. Also, check the coolant reservoir to ensure it's between the "Full" and "Low" marks.
Inspect the brake pads for wear and replace them if necessary. Check for leaks in the brake lines and ensure the brake fluid is at the correct level. Bleed the brakes if they feel spongy.
Regularly inspect the suspension system for leaks or damage, ensure all bolts are tight, and check the condition of the shock absorbers. Adjust the suspension settings according to your riding style and terrain.