Yamaha YFM90RA Raptor 90 2012 Owner's Manual
![Yamaha YFM90RA Raptor 90 2012 manual cover](/images/7a571ee08c45ebe7a8863add/thumbs/thumb175x175.webp)
Use regular unleaded gasoline with a minimum octane rating of 86 to ensure optimal engine performance and longevity.
It's recommended to change the engine oil every 6 months or every 100 hours of operation, whichever comes first.
The recommended tire pressure is 4.4 psi for the front tires and 4.4 psi for the rear tires.
Check the battery connections, ensure the fuel valve is open, make sure the engine stop switch is in the 'run' position, and inspect the spark plug for wear or fouling.
Inspect the air filter every 20 hours of operation and clean or replace it as needed to ensure proper air flow to the engine.
Loosen the rear axle nut, adjust the chain tension using the adjuster bolts, ensuring there is about 0.8 to 1.2 inches of slack, then retighten the axle nut.
Check for obstructions in the air cooling fins, ensure the oil level is adequate, and inspect the cooling fan for proper operation.
Regular maintenance such as timely oil changes, correct tire pressure, and keeping the air filter clean can improve performance. Consider upgrading the exhaust for more power.
The recommended spark plug for the Yamaha YFM90RA Raptor 90 2012 is NGK CR7HSA. Ensure proper gap settings before installation.
Clean the ATV thoroughly, change the oil, fill the tank with stabilized fuel, disconnect the battery, and cover it to protect from dust and moisture.