Yamaha YFM350FXP C Wolverine 2002 Owner's Manual
![Yamaha YFM350FXP C Wolverine 2002 manual cover](/images/fa1324efdb07dfe8d65327b3/thumbs/thumb175x175.webp)
The recommended oil type for the Yamaha YFM350FXP C Wolverine 2002 is SAE 10W-30, Yamalube 4, or an equivalent 4-stroke engine oil with an API service classification of SG or higher.
It's advisable to change the oil every 20 hours of operation or every 6 months, whichever comes first. Regular oil changes help maintain engine performance and longevity.
First, check the battery for sufficient charge and connections for corrosion. Ensure the fuel is fresh and that the fuel valve is open. Inspect the spark plug for wear or fouling and replace if necessary.
The recommended tire pressure for the front tires is 4.4 psi (30 kPa) and for the rear tires is 3.6 psi (25 kPa). Maintaining the correct tire pressure ensures optimal handling and performance.
Regularly inspect brake pads for wear and replace them if they are below the minimum thickness. Check brake fluid levels and look for leaks. Ensure the brake lines are free of damage and properly connected.
Stop the vehicle immediately and allow the engine to cool. Check the coolant level and replenish if necessary. Inspect the radiator for obstructions and ensure the cooling fan is operational.
To replace the air filter, first remove the seat and locate the airbox. Open the airbox cover and remove the old air filter. Install the new air filter, ensuring it is seated properly, and reattach the airbox cover and seat.
To winterize your ATV, clean it thoroughly and apply a protective wax. Change the oil and filter, add fuel stabilizer to the gas tank, and disconnect the battery. Store the ATV in a dry, covered place.
Loosen the rear axle nut, adjust the chain tensioner bolts evenly on both sides until the chain has about 1-2 inches of slack, and then retighten the axle nut to secure the adjustments.
Check the air filter for clogs, ensure the fuel is fresh, and inspect the spark plug condition. Additionally, verify that the throttle cable is adjusted correctly and that the carburetor is clean.