Yamaha XVS965CG, XVS965CGC Bolt 2016 Owner's Manual
![Yamaha XVS965CG, XVS965CGC Bolt 2016 manual cover](/images/607b452a3dce563d77c7210e/thumbs/thumb175x175.webp)
The recommended oil type for the Yamaha XVS965CG Bolt 2016 is Yamalube 4, 10W-40 or equivalent. The oil capacity is approximately 2.6 liters (2.7 US qt) when changing the oil filter.
To adjust the drive belt tension, first place the motorcycle on a stand to lift the rear wheel. Loosen the rear axle nut, then use the belt tension adjusters on both sides of the swingarm to achieve the correct tension. The belt should have a slack of 5-7mm (0.2-0.3 inches) when measured with 10 lbs of force. Tighten the axle nut to the specified torque.
To replace the air filter, first remove the seat and the air filter cover by unscrewing the bolts. Carefully take out the old air filter and replace it with a new one. Ensure the new filter is seated properly before reattaching the cover and seat.
Regular maintenance should be performed every 4,000 miles or 6 months, whichever comes first. This includes oil changes, checking and adjusting the drive belt, inspecting the brakes, and checking the air filter.
If the motorcycle won't start, check the battery for charge and connections, ensure the kill switch is in the 'Run' position, verify the fuel level, and check the spark plugs for fouling or damage. If these steps do not resolve the issue, further diagnostic by a professional may be necessary.
To improve fuel efficiency, regularly maintain your motorcycle by changing the oil, keeping the tires inflated to the correct pressure, ensuring the air filter is clean, and avoiding aggressive acceleration. Proper maintenance and smooth riding can significantly enhance fuel efficiency.
The recommended brake fluid for the Yamaha XVS965CG Bolt 2016 is DOT 4 brake fluid. Ensure the brake fluid reservoir is filled to the appropriate level and is free of contaminants.
To check and adjust tire pressure, use a reliable tire pressure gauge. The recommended pressure is 33 psi for the front tire and 36 psi for the rear tire. Adjust the pressure using an air pump if necessary, and always check tire pressure when the tires are cold.
If the motorcycle overheats, check the coolant level and ensure the radiator is not clogged. Allow the engine to cool before inspecting. Consider replacing old coolant and ensuring the cooling fan operates correctly. Persistent overheating should be assessed by a professional.
Ensuring the longevity of your motorcycle involves regular maintenance, such as timely oil changes, keeping the bike clean, storing it properly when not in use, and addressing any mechanical issues promptly. Following the manufacturer's maintenance schedule is crucial.