Yamaha XVS95CTH, XVS95CTHC 2017 Owner's Manual
![Yamaha XVS95CTH, XVS95CTHC 2017 manual cover](/images/6dc5d29952990f2d04f6158d/thumbs/thumb175x175.webp)
The recommended oil type for the Yamaha XVS95CTH is SAE 10W-40, and the oil capacity is approximately 4.3 liters (4.5 US qt) including oil filter replacement.
To troubleshoot starting issues, ensure the battery is fully charged, check the starter motor and solenoid, inspect the ignition switch, and verify the fuel supply. If the problem persists, consult with a professional technician.
The recommended tire pressure for the Yamaha XVS95CTH is 36 psi for the front tire and 41 psi for the rear tire.
The air filter should be inspected every 6,000 miles (10,000 km) and replaced if necessary. Regular maintenance will ensure optimal performance.
If the engine overheats, stop the motorcycle immediately, check the coolant level, ensure the radiator is not blocked, and inspect the cooling fan. Allow the engine to cool before further inspection.
To adjust the clutch, locate the clutch cable adjuster near the left handlebar. Loosen the lock nut, turn the adjuster to achieve the desired free play, and then tighten the lock nut. Typically, 10-15mm of free play is recommended.
To clean the Yamaha XVS95CTH, use mild soap and water, rinse thoroughly, and dry with a soft cloth. Avoid high-pressure washers and ensure electrical components are protected. Apply wax for added protection.
Perform a battery maintenance check by inspecting the terminals for corrosion, ensuring a secure connection, checking the electrolyte level if applicable, and testing the voltage with a multimeter. Charge or replace the battery as necessary.
The torque specification for the Yamaha XVS95CTH's front wheel nut is 59 ft-lb (80 Nm) and the rear wheel nut is 108 ft-lb (147 Nm). Always use a torque wrench for accurate tightening.
Spark plugs should be inspected every 6,000 miles (10,000 km) and replaced every 12,000 miles (20,000 km) to ensure optimal engine performance and efficiency.