Yamaha XVS13AE C Star 2014 Owner's Manual
![Yamaha XVS13AE C Star 2014 manual cover](/images/69923cd87b2085af43ee1564/thumbs/thumb175x175.webp)
To perform an oil change, warm up the engine, place the bike on a stable stand, remove the drain plug, and allow the old oil to fully drain. Replace the oil filter and reinstall the drain plug. Finally, refill with the recommended oil type and amount.
Use a high-quality ethylene glycol antifreeze coolant that is specifically formulated for aluminum engines. Ensure it is mixed with distilled water in a 50:50 ratio.
Check the battery for charge and connections, ensure the kill switch is in the 'run' position, inspect the starter motor, and verify fuel levels. If problems persist, consult a professional technician.
The recommended tire pressure is typically around 36 psi for the front tire and 41 psi for the rear tire, but always refer to the owner's manual for exact specifications.
Locate the clutch cable adjuster near the lever or at the engine end. Loosen the locknut and turn the adjuster to achieve the desired free play, then tighten the locknut to secure the adjustment.
Immediately stop riding and turn off the engine. Allow it to cool down, check coolant levels, and inspect for radiator leaks or blockages. Seek professional assistance if the issue persists.
It is generally recommended to replace the air filter every 12,000 miles or 20,000 kilometers, but check it periodically and replace sooner if riding in dusty conditions.
Maintain proper tire pressure, regularly service the engine, use high-quality fuel, and avoid aggressive acceleration and braking to improve fuel efficiency.
During a routine inspection, check the engine oil, coolant level, brake fluid, tire condition and pressure, lights, and drive belt tension.
Clean the motorcycle thoroughly, add a fuel stabilizer, change the oil, remove the battery, and store in a dry, covered space. Consider using a motorcycle cover for added protection.