Yamaha XTZ12EM, XTZ12EMC Super Tenere ES 2021 Owner's Manual

To adjust the suspension settings on your Yamaha XTZ12EM, use the electronic suspension adjustment feature. Navigate through the settings using the handlebar controls to access the suspension options. You can adjust the preload, rebound damping, and compression damping based on your riding conditions and preferences.
The recommended oil type for the Yamaha XTZ12EMC is Yamalube 10W-40 or a similar high-quality engine oil. The oil change interval is approximately every 4,000 miles (6,400 kilometers) or once a year, whichever comes first. Always refer to the owner’s manual for specific maintenance schedules.
If your Yamaha XTZ12EM is having starting issues, first check the battery for sufficient charge and ensure the connections are clean and tight. Next, inspect the fuses and ignition switch. If the problem persists, consider checking the starter motor and relay, or consult a professional technician.
If the ABS warning light stays on, it indicates a potential issue with the ABS system. First, ensure the wheel sensors are clean and properly connected. If the light remains on, it is advisable to have the ABS system checked by a certified Yamaha technician as soon as possible.
To adjust the chain on the Yamaha XTZ12EMC, place the bike on a center stand and locate the adjuster bolts on the swingarm. Loosen the axle nut and turn the adjuster bolts evenly on both sides to achieve the proper chain tension, which should have about 1.2-1.6 inches (30-40 mm) of slack. Tighten the axle nut and recheck the tension.
Common causes of overheating in the Yamaha XTZ12EM include low coolant levels, a malfunctioning thermostat, blocked radiator fins, or a faulty water pump. Regularly check the coolant level and inspect the radiator for debris. Ensure the cooling fan operates correctly and clean the radiator fins if necessary.
To improve fuel efficiency on your Yamaha XTZ12EMC, maintain proper tire pressure, use high-quality fuel, and ensure regular maintenance such as air filter changes and spark plug checks. Riding smoothly and avoiding aggressive acceleration can also contribute to better fuel economy.
The recommended tire pressure for the Yamaha XTZ12EM Super Tenere is typically 33 psi (225 kPa) for the front tire and 36 psi (250 kPa) for the rear tire. Always check the owner’s manual or the tire placard on the motorcycle for the most accurate information.
To reset the maintenance light on your Yamaha XTZ12EMC, turn the ignition on without starting the engine. Use the menu button on the handlebar to navigate to the maintenance settings. Press and hold the reset button until the maintenance light turns off. Refer to the owner’s manual for more details if needed.
To winterize your Yamaha XTZ12EM, start by cleaning the motorcycle thoroughly. Change the oil and filter, add fuel stabilizer to the tank, and run the engine for a few minutes. Disconnect the battery and store it in a warm place. Inflate the tires to the recommended pressure and cover the bike to protect it from dust and moisture.