Yamaha VF115 v7 Owner's Manual

U6FN30E0.book Page 1 Wednesday, December 3, 2014 3:03 PM

OWNERS MANUAL

Read this manual carefully before operating this outboard motor.

VF115

LIT-18626-10-76 6FN-28199-30-E0

U6FN30E0.book Page 1 Wednesday, December 3, 2014 3:03 PM

ZMU07696

Les gaz dchappement du moteur de ce produit contiennent des substances chimiques connues dans ltat de Californie pour provoquer le cancer, des anomalies congnitales et des troubles de la reproduction.

Read this manual carefully before operating this outboard motor. Keep this manual onboard in a waterproof bag when boating. This manual should stay with the outboard motor if it is sold.

Important manual information EMU44141

To the owner Thank you for selecting a Yamaha outboard motor. This Owners Manual contains infor- mation needed for proper operation, mainte- nance and care. A thorough understanding of these simple instructions will help you obtain maximum enjoyment from your new Yamaha. If you have any question about the operation or maintenance of your outboard motor, please consult a Yamaha dealer. In this Owners Manual particularly important information is distinguished in the following ways.

: This is the safety alert symbol. It is used to alert you to potential personal injury haz- ards. Obey all safety messages that follow this symbol to avoid possible injury or death.

WARNING EWM00782

A WARNING indicates a hazardous situa- tion which, if not avoided, could result in death or serious injury.

NOTICE ECM00702

A NOTICE indicates special precautions that must be taken to avoid damage to the outboard motor or other property.

TIP: A TIP provides key information to make pro- cedures easier or clearer.

Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most current prod- uct information available at the time of print- ing, there may be minor discrepancies

between your machine and this manual. If there is any question concerning this manual, please consult your Yamaha dealer. To ensure long product life, Yamaha recom- mends that you use the product and perform the specified periodic inspections and main- tenance by correctly following the instruc- tions in the owners manual. Any damage resulting from neglect of these instructions is not covered by warranty. Some countries have laws or regulations re- stricting users from taking the product out of the country where it was purchased, and it may be impossible to register the product in the destination country. Additionally, the war- ranty may not apply in certain regions. When planning to take the product to another coun- try, consult the dealer where the product was purchased for further information. If you purchased this outboard motor used, see your Yamaha dealer to have it registered in your name in Yamaha records.

TIP: The VF115A and the standard accessories are used as a base for the explanations and illustrations in this manual. Therefore some items may not apply to every model. EMU44151

VF115 OWNERS MANUAL

2014 by Yamaha Motor Co., Ltd. 1st Edition, November 2014

All rights reserved. Any reprinting or unauthorized use without the written permission of

Yamaha Motor Co., Ltd. is expressly prohibited.

Printed in Japan

U6FN30E0.book Page 1 Wednesday, December 3, 2014 3:03 PM

Table of contents

U6FN30E0.book Page 1 Wednesday, December 3, 2014 3:03 PM

Safety information.............................1 Outboard motor safety.................... 1

Propeller ............................................. 1 Rotating parts..................................... 1 Hot parts ............................................ 1 Electric shock..................................... 1 Power trim and tilt .............................. 1 Engine shut-off cord (lanyard) ............ 1 Gasoline ............................................. 2 Gasoline exposure and spills ............. 2 Carbon monoxide .............................. 2 Modifications...................................... 2

Boating safety ................................. 2 Alcohol and drugs .............................. 2 Personal flotation devices (PFDs) ...... 2 People in the water ............................ 2 Passengers......................................... 2 Overloading........................................ 2 Avoid collisions .................................. 3 Weather .............................................. 3 Accident reporting.............................. 3 Boat education and training............... 3 Passenger training ............................. 4 Boating safety publications................ 4 Laws and regulations ......................... 4

Boating organizations ..................... 4 Basic boating rules

(Rules of the road)........................ 5 Steering and sailing rules and sound

signals............................................. 5 Rules when encountering vessels...... 5 Other special situations...................... 6

General information ..........................9 Identification numbers record ......... 9

Outboard motor serial number........... 9 Key number........................................ 9

Compliance mark and manufactured date label .............. 9

Read manuals and labels.............. 11 Warning labels ................................. 11

Specifications and requirements ................................... 14

Specifications ............................... 14 Installation requirements .............. 15

Boat horsepower rating.................... 15 Mounting outboard motor ................ 15

Remote control requirements ....... 15 Battery requirements .................... 15

Specifications of Battery .................. 15 Mounting battery .............................. 16

Propeller selection ........................ 16 Start-in-gear protection ................ 17 Engine oil requirements ................ 17 Fuel requirements ......................... 17

Gasoline ........................................... 17 Gasoline Additives............................ 19

Muddy or acidic water .................. 19 Anti-fouling paint .......................... 19 Outboard motor disposal

requirements.............................. 20 Emergency equipment.................. 20 Emission control information ....... 20

Star labels ........................................ 20

Components.................................... 22 Components diagram ................... 22

Remote control box.......................... 24 Remote control lever ........................ 25 Neutral interlock trigger.................... 25 Free accelerator ............................... 26 Throttle friction adjuster ................... 26 Engine shut-off cord (lanyard) and

clip ................................................ 27 Main switch ...................................... 28 Power trim and tilt switch on remote

control ........................................... 28 Power trim and tilt switch on bottom

cowling.......................................... 29 Trim tab with anode ......................... 29 Tilt support lever for power trim and

tilt model ....................................... 30 Cowling lock lever ............................ 30 Flushing device ................................ 31

Table of contents

U6FN30E0.book Page 2 Wednesday, December 3, 2014 3:03 PM

Fuel filter........................................... 31

Instruments and indicators ............ 32 Digital tachometer ......................... 32

Tachometer ...................................... 32 Trim meter ........................................ 32 Hour meter ....................................... 32 Low oil pressure-alert indicator........ 32 Overheat-alert indicator ................... 33

Digital speedometer ...................... 33 Speedometer.................................... 33 Fuel gauge........................................ 34 Trip meter / Clock / Voltmeter.......... 34 Fuel level-alert indicator ................... 35 Low battery voltage-alert

indicator ........................................ 35 Fuel management meter ............... 35

Fuel flow meter................................. 36 Fuel consumption meter / Fuel

economy meter / Twin engine speed synchronizer....................... 36

Water separator-alert indicator ........ 38 6Y8 Multifunction meters .............. 38 6Y8 Multifunction tachometers ..... 38

Start-up checks................................ 39 Low oil pressure-alert....................... 39 Overheat alert................................... 40 Water separator alert........................ 40 Engine trouble alert .......................... 41 Low battery voltage-alert ................. 41

6Y8 Multifunction speed & fuel meters ........................................ 42

6Y8 Multifunction speedometers ............................ 43

6Y8 Multifunction fuel management meters .................. 43

Engine control system .................... 45 Alert system .................................. 45

Overheat alert................................... 45 Low oil pressure alert ....................... 45 Water separator alert........................ 46

Installation ....................................... 48 Installation..................................... 48

Mounting the outboard motor .......... 48

Operation......................................... 50 First-time operation ...................... 50

Fill engine oil..................................... 50 Breaking in engine............................ 50 Getting to know your boat ............... 50

Checks before starting engine...... 50 Fuel level .......................................... 51 Removing top cowling...................... 51 Fuel system ...................................... 51 Controls............................................ 52 Engine shut-off cord (lanyard) .......... 52 Engine oil.......................................... 52 Outboard motor................................ 53 Flushing device ................................ 53 Install cowling................................... 53 Power trim and tilt system................ 54 Battery.............................................. 54

Filling fuel ..................................... 55 Operating engine .......................... 55

Sending fuel ..................................... 55 Starting engine ................................. 56

Checks after starting engine......... 58 Cooling water ................................... 58

Warming up engine....................... 58 Procedure for warming up engine.... 58

Checks after engine warm up....... 58 Shifting ............................................. 58 Stop switches................................... 58

Shifting.......................................... 58 Stopping boat ............................... 60 Stopping engine............................ 60

Procedure for stopping engine......... 60 Trimming outboard motor............. 60

Adjusting trim angle ......................... 61 Adjusting boat trim ........................... 61

Tilting up and down ...................... 62 Procedure for tilting up

(power trim and tilt models) .......... 63 Procedure for tilting down................ 64

Table of contents

U6FN30E0.book Page 3 Wednesday, December 3, 2014 3:03 PM

Shallow water ............................... 64 Cruising in shallow water ................. 64

Operating in other conditions ....... 65

Maintenance .................................... 67 Transporting and storing outboard

motor.......................................... 67 Storing outboard motor.................... 67 Conditioning and stabilizing

gasoline......................................... 68 Procedure......................................... 68 Lubrication ....................................... 69 Cleaning and anticorrosion

measures ...................................... 69 Flushing cooling water passage....... 69 Cleaning the outboard motor ........... 70 Checking painted surface of

outboard motor............................. 70 Periodic maintenance ................... 71

Replacement parts ........................... 71 Maintenance interval guidelines....... 71 Maintenance chart 1 ........................ 72 Maintenance chart 2 ........................ 74 Greasing........................................... 75 Inspecting spark plug....................... 76 Inspecting idle speed ....................... 77 Changing engine oil.......................... 77 Inspecting wiring and connectors .... 80 Inspecting propeller ......................... 80 Removing propeller .......................... 81 Installing propeller ............................ 81 Changing gear oil ............................. 82 Inspecting and replacing anode(s) ... 83 Checking battery (for electric start

models) ......................................... 84 Connecting the battery..................... 84 Disconnecting the battery ................ 85

Trouble Recovery ............................ 86 Troubleshooting ............................ 86 Temporary action in emergency ... 89

Impact damage ................................ 89 Replacing fuse ................................. 89

Power trim and tilt unit will not operate.......................................... 90

Water separator-alert is activated after leaving port ........................... 90

Treatment of submerged motor.... 92

Consumer information (For North America) ........................ 93

YAMAHA FOUR-STROKE OUTBOARD MOTOR THREE-YEAR LIMITED WARRANTY............................... 93

IMPORTANT WARRANTY INFORMATION IF YOU USE YOUR YAMAHA OUTSIDE THE U.S.A. OR CANADA................... 95

INDEX............................................... 96

U6FN30E0.book Page 1 Wednesday, December 3, 2014 3:03 PM

Safety information

Outboard motor safety Observe these precautions at all times. EMU36502

Propeller People can be injured or killed if they come in contact with the propeller. The propeller can keep moving even when the motor is in neu- tral, and sharp edges of the propeller can cut even when stationary. Stop the engine when a person is in the

water near you. Keep people out of reach of the propeller,

even when the engine is off. EMU40272

Rotating parts Hands, feet, hair, jewelry, clothing, personal flotation device (PFD) straps, etc., can be- come entangled with internal rotating parts of the engine, resulting in serious injury or death. Keep the top cowling in place whenever pos- sible. Do not remove or replace the top cowl- ing with the engine running. Only operate the engine with the top cowling removed according to the specific instruc- tions in the manual. Keep hands, feet, hair, jewelry, clothing, PFD straps, etc., away from any exposed moving parts. EMU33641

Hot parts During and after operation, engine parts are hot enough to cause burns. Avoid touching any parts under the top cowling until the en- gine has cooled. EMU33651

Electric shock Do not touch any electrical parts while start- ing or operating the engine. They can cause shock or electrocution.

EMU33661

Power trim and tilt Body parts can be crushed between the mo- tor and the clamp bracket when the motor is trimmed or tilted. Keep body parts out of this area at all times. Be sure no one is in this area before operating the power trim and tilt mechanism. The power trim and tilt switches operate even when the main switch is off. Keep people be away from the switches whenever working around the motor. Never get under the lower unit while it is tilted, even when the tilt support lever is locked. Se- vere injury could occur if the outboard motor accidentally falls. EMU33672

Engine shut-off cord (lanyard) Attach the engine shut-off cord so that the engine stops if the operator falls overboard or leaves the helm. This prevents the boat from running away under power and leaving peo- ple stranded, or running over people or ob- jects. Always attach the engine shut-off cord to a secure place on your clothing or your arm or leg while operating. Do not remove it to leave the helm while the boat is moving. Do not at- tach the cord to clothing that could tear loose, or route the cord where it could be- come entangled, preventing it from function- ing. Do not route the cord where it is likely to be accidentally pulled out. If the cord is pulled during operation, the engine will shut off and you will lose most steering control. The boat could slow rapidly, throwing people and ob- jects forward.

1

Safety information

U6FN30E0.book Page 2 Wednesday, December 3, 2014 3:03 PM

EMU33811

Gasoline Gasoline and its vapors are highly flamma- ble and explosive. Always, refuel according to the procedure on page 55 to reduce the risk of fire and explosion. EMU33821

Gasoline exposure and spills Take care not to spill gasoline. If gasoline spills, wipe it up immediately with dry rags. Dispose of rags properly. If any gasoline spills onto your skin, immedi- ately wash with soap and water. Change clothing if gasoline spills on it. If you swallow gasoline, inhale a lot of gaso- line vapor, or get gasoline in your eyes, get immediate medical attention. Never siphon fuel by mouth. EMU33901

Carbon monoxide This product emits exhaust gases which con- tain carbon monoxide, a colorless, odorless gas which may cause brain damage or death when inhaled. Symptoms include nausea, dizziness, and drowsiness. Keep cockpit and cabin areas well ventilated. Avoid blocking exhaust outlets. EMU33781

Modifications Do not attempt to modify this outboard mo- tor. Modifications to your outboard motor may reduce safety and reliability, and render the outboard unsafe or illegal to use. EMU33741

Boating safety This section includes a few of the many im- portant safety precautions that you should follow when boating. EMU33711

Alcohol and drugs Never operate after drinking alcohol or taking drugs. Intoxication is one of the most com- mon factors contributing to boating fatalities.

EMU40281

Personal flotation devices (PFDs) Have an approved PFD on board for every occupant. Yamaha recommends that you must wear a PFD whenever boating. At a minimum, children and non-swimmers should always wear PFDs, and everyone should wear PFDs when there are potentially hazardous boating conditions. EMU33732

People in the water Always watch carefully for people in the wa- ter, such as swimmers, skiers, or divers, whenever the engine is running. When some- one is in the water near the boat, shift into neutral and stop the engine. Stay away from swimming areas. Swimmers can be hard to see. The propeller can keep moving even when the motor is in neutral. Stop the engine when a person is in the water near you. EMU33752

Passengers Consult your boat manufacturers instruc- tions for details about appropriate passenger locations in your boat and be sure all passen- gers are positioned properly before acceler- ating and when operating above an idle speed. Standing or sitting in non-designated locations may result in being thrown either overboard or within the boat due to waves, wakes, or sudden changes in speed or direc- tion. Even when people are positioned prop- erly, alert your passengers if you must make any unusual maneuver. Always avoid jump- ing waves or wakes. EMU33762

Overloading Do not overload the boat. Consult the boat capacity plate or boat manufacturer for max- imum weight and number of passengers. Be sure that weight is properly distributed ac- cording to the boat manufacturers instruc-

2

Safety information

U6FN30E0.book Page 3 Wednesday, December 3, 2014 3:03 PM

tions. Overloading or incorrect weight distribution can compromise the boats han- dling and lead to an accident, capsizing or swamping. EMU33773

Avoid collisions Scan constantly for people, objects, and oth- er boats. Be alert for conditions that limit your visibility or block your vision of others.

Operate defensively at safe speeds and keep a safe distance away from people, objects, and other boats. Do not follow directly behind other boats or

waterskiers. Avoid sharp turns or other maneuvers that

make it hard for others to avoid you or un- derstand where you are going.

Avoid areas with submerged objects or shallow water.

Ride within your limits and avoid aggres- sive maneuvers to reduce the risk of loss of control, ejection, and collision.

Take early action to avoid collisions. Re- member, boats do not have brakes, and stopping the engine or reducing throttle can reduce the ability to steer. If you are not sure that you can stop in time before hitting an obstacle, apply throttle and turn in an- other direction.

EMU33791

Weather Stay informed about the weather. Check weather forecasts before boating. Avoid boating in hazardous weather. EMU44161

Accident reporting Boat operators are required by law to file a Boating Accident Report with their boating law enforcement agency if their boat is in- volved in any of the following accidents: 1. There is loss of life or probable loss of

life. 2. There is personal injury that requires

medical attention beyond first aid. 3. There is property damage to boats or

other property over a certain amount. 4. There is complete loss of a boat. Contact local law enforcement personnel if a report is necessary. EMU44171

Boat education and training For U.S.A. Operators should take a boating safety course. This may be required in your state. Many of the organizations listed in the next section can provide information about cours- es in your area. You may also want to consider an Internet- based program for basic boater education. The Online Boating Safety Course provided by the BoatU.S. Foundation, is approved by the National Association of State Boating Law Administrators (NASBLA) and recog- nized by the United States Coast Guard. Most, but not all, states accept this course to meet their minimum requirements. While it cannot replace an in-depth course such as one offered by the U.S. Coast Guard, U.S. Power Squadron, or other organization, this online course does provide a general over- view of the basics in boating safety, require- ments, navigation, and operation. Upon

ZMU06025

3

Safety information

U6FN30E0.book Page 4 Wednesday, December 3, 2014 3:03 PM

successful completion of the course, the user can download a certificate of completion im- mediately or, for a small charge, request one by mail. To take this free course, go to boa- tus.org. For Canada All operators of pleasure craft must illustrate competency by means of a Pleasure Craft Operators Card with the exception of Person- al Water Craft used for rental purposes which require a rental checklist be completed. Plea- sure Craft Operators Cards can be obtained following the completion of a competency course, with an on-line option. Details can be found on Transport Canadas website. www.tc.gc.ca EMU33881

Passenger training Make sure at least one other passenger is trained to operate the boat in the event of an emergency. EMU33891

Boating safety publications Be informed about boating safety. Additional publications and information can be obtained from many boating organizations. EMU33591

Laws and regulations Know the marine laws and regulations where you will be boating- and obey them. Several sets of rules prevail according to geographic location, but all are basically the same as the International Rules of the Road. The rules presented in the following section are con- densed- and have been provided for your convenience only. Contact the U.S. Coast Guard, the National Association of State Boating Law Administra- tors, or your local Power Squadron for a com- plete set of rules governing the waters in which you will be using your boat.

EMU44740

Boating organizations The following organizations provide boating safety training and information about boating safety and laws.

In the U.S.A. United States Coast Guard Consumer Affairs Staff (G-BC) Office of Boating, Public, and Consumer Af- fairs U.S. Coast Guard Headquarters Washington, D.C. 20593-0001 http://www.uscgboating.org/

United States Power Squadrons 1-888-FOR-USPS (1-888-367-8777) http://www.usps.org/

Boat Owners Association of The United States 1-800-336-BOAT (1-800-336-2628) http://www.boatus.com/

National Association of State Boating Law Administrators (NASBLA) 1500 Leestown Road, Suite 330 Lexington, KY 40511 859-225-9497 http://www.nasbla.org/

National Marine Manufacturers Associa- tion (NMMA) 200 East Randolph Drive Suite 5100 Chicago, IL 60601 http://www.nmma.org/

Marine Retailers Association of America 155 N. Michigan Ave. Chicago, IL 60304 http://www.mraa.com/

4

Safety information

U6FN30E0.book Page 5 Wednesday, December 3, 2014 3:03 PM

In Canada National Marine Manufacturers Associa- tion Canada 14 McEwan Drive Suite 8 Bolton, ON L7E 1H1 http://www.nmma.org/

In Australia Boating Industry Association of Australia http://www.biaa.com.au/

In New Zealand NZ Marine Industry Association http://www.nzmarine.com/

EMU33692

Basic boating rules (Rules of the road)

Just as there are rules that apply when you are driving on streets and highways, there are waterway rules that apply when you are driv- ing your boat. These rules are used interna- tionally. (For U.S.A.: and are also enforced by the United States Coast Guard and local agencies.) You should be aware of these rules, and follow them whenever you encoun- ter another vessel on the water. EMU33702

Steering and sailing rules and sound signals Whenever two vessels on the water meet one another, one vessel has the right-of-way; it is called the stand-on vessel. The vessel that does not have the right-of-way is called the give-way or burdened vessel. These rules determine which vessel has the right-of-way, and what each vessel should do.

Stand-on vessel The vessel with the right-of-way has the duty to continue its course and speed, except to avoid an immediate collision. When you maintain your direction and speed, the other vessel will be able to determine how best to avoid you.

Give-way vessel The vessel that does not have the right-of- way has the duty to take positive and timely action to stay out of the way of the Stand-On vessel. Normally, you should not cross in front of the vessel with the right-of-way. You should slow down or change directions brief- ly and pass behind the other vessel. You should always move in such a way that the operator of the other vessel can see what you are doing. The general prudential rule This rule is called Rule 2 in the International Rules and says, In obeying and construing these rules due regard shall be had to all dangers of naviga- tion and collision, and to any special circum- stances, which may render a departure from the above rules necessary in order to avoid immediate danger. In other words, follow the standard rules ex- cept when a collision will occur unless both vessels try to avoid each other. If that is the case, both vessels become Give-Way ves- sels. EMU25522

Rules when encountering vessels There are three main situations that you may encounter with other vessels which could lead to a collision unless the Steering Rules are followed: Meeting: (you are approaching another ves- sel head-on)

5

Safety information

U6FN30E0.book Page 6 Wednesday, December 3, 2014 3:03 PM

Crossing: (you are traveling across the other vessels path) Overtaking: (you are passing or being passed by another vessel) In the following illustration, your boat is in the center. You should give the right-of-way to any vessels shown in white area (you are the Give-Way vessel). Any vessels in the shaded area must yield to you (they are the Give-Way vessels). Both you and the meeting vessel must alter course to avoid each other.

Meeting If you are meeting another power vessel head on, and are close enough to run the risk of collision, neither of you has the right-of-way Both of you should alter course to avoid an accident. You should keep the other vessel on your port (left) side. This rule doesnt apply if both of you will clear one another if you con- tinue on your set course and speed.

Crossing When two power driven vessels are crossing each others path close enough to run the risk of collision, the vessel which has the other on the starboard (right) side must keep out of the way of the other. If the other vessel is on your right, you must keep out of its way; you are the Give-Way vessel. If the other vessel is on your port (left) side, remember that you should maintain course and direction, provid- ed the other vessel gives you the right-of-way as it should.

Overtaking If you are passing another vessel, you are the Give-Way vessel. This means that the other vessel is expected to maintain its course and speed. You must stay out of its way until you are clear of it. Likewise, if another vessel is passing you, you should maintain your speed and direction so that the other vessel can steer itself around you. EMU25532

Other special situations There are three other rules you should be aware of when driving your boat around other vessels. Narrow channels and bends When navigating in narrow channels, you should keep to the right when it is safe and practical to do so. If the operator of a power- driven vessel is preparing to go around a bend that may obstruct the view of other wa-

6

Safety information

U6FN30E0.book Page 7 Wednesday, December 3, 2014 3:03 PM

ter vessels, the operator should sound a pro- longed blast on the whistle (4 to 6 seconds). If another vessel is around the bend, it too should sound the whistle. Even if no reply is heard, however, the vessel should still pro- ceed around the bend with caution. If you navigate such waters with your boat, you will need to carry a portable air horn, available from local marine supply stores. Fishing vessel right-of-way All vessels that are fishing with nets, lines or trawls are considered to be fishing vessels under the International Rules. Vessels with trolling lines are not considered fishing ves- sels. Fishing vessels have the right-of-way regardless of position. Fishing vessels can- not, however, impede the passage of other vessels in narrow channels. Sailing vessel right-of-way Sailing vessels should normally be given the right-of-way. The exceptions to this are: 1. When the sailing vessel is overtaking the

power-driven vessel, the power-driven vessel has the right-of-way.

2. Sailing vessels should keep clear of any fishing vessel.

3. In a narrow channel, a sailing vessel should not hamper the safe passage of a power-driven vessel that can navigate only in such a channel.

Reading buoys and other markers The waters of the United States are marked for safe navigation by the lateral system of buoyage. Simply put, buoys and markers have an arrangement of shapes, colors, num- bers and lights to show which side of the buoy a boater should pass on when navigat- ing in a particular direction. The markings on these buoys are oriented from the perspec- tive of being entered from seaward (the boat- er is going towards the port). This means that

red buoys are passed on the starboard (right) side when proceeding from open water into port, and black buoys are to port (left) side. When navigating out of port, your position with respect to the buoys should be reversed; red buoys should be to port and black buoys to starboard. Many bodies of water used by boaters are entirely within the boundaries of a particular state. The Uniform State Waterway Marking System has been devised for these waters. This system uses buoys and signs with dis- tinctive shapes and colors to show regulatory or advisory information. These markers are white with black letters and orange boarders. They signify speed zones, restricted areas, danger areas, and general information. Remember, markings may vary by geograph- ic location. Always consult local boating au- thorities before driving your boat in unfamiliar waters.

7

Safety information

U6FN30E0.book Page 8 Wednesday, December 3, 2014 3:03 PM

ZMU01708

8

General information

U6FN30E0.book Page 9 Wednesday, December 3, 2014 3:03 PM

EMU25172

Identification numbers record EMU25186

Outboard motor serial number The outboard motor serial number is stamped on the label attached to the port side of the clamp bracket. Record your outboard motor serial number in the spaces provided to assist you in ordering spare parts from your Yamaha dealer or for reference in case your outboard motor is sto- len.

EMU25192

Key number If a main key switch is equipped with the mo- tor, the key identification number is stamped on your key as shown in the illustration. Re- cord this number in the space provided for reference in case you need a new key.

EMU46132

Compliance mark and manu- factured date label

Engines affixed with this label conform to the regulations for each country. This label is affixed to the clamp bracket or swivel bracket.

1. Outboard motor serial number location

1. Serial number 2. Model name 3. Motor transom height 4. Approved model code

1

ZMU07793

34 12

ZMU01692

1. Key number

1. Compliance mark and manufactured date label location

1

ZMU08071

9

General information

U6FN30E0.book Page 10 Wednesday, December 3, 2014 3:03 PM

Regulatory Compliance Mark (RCM) Engines affixed with this mark conform to certain portion(s) of the Australian Radio Communications Act.

ICES-002 Compliance Label Engines affixed with this mark meet all re- quirements of the Canadian Interference Causing Equipment Regulations.

Manufactured date The manufactured date is stamped on the la- bel for the engines that conform to the regu- lations for U.S. Environmental Protection Agency (EPA). The models that manufac- tured exclusively for the Oceanian countries may not have manufactured date on the la- bel.

1. Regulatory Compliance Mark (RCM)

1. ICES-002 Compliance Label

ZMU08190

1

ZMU08191 1

1. Manufactured date

ZMU08192

1

10

General information

U6FN30E0.book Page 11 Wednesday, December 3, 2014 3:03 PM

EMU33524

Read manuals and labels Before operating or working on this outboard motor: Read this manual. Read any manuals supplied with the boat. Read all labels on the outboard motor and the boat. If you need any additional information, contact your Yamaha dealer. EMU33834

Warning labels If these labels are damaged or missing, contact your Yamaha dealer for replacements.

1

2 ZMU08068

11

General information

U6FN30E0.book Page 12 Wednesday, December 3, 2014 3:03 PM

EMU34652

Contents of labels The above warning labels mean as follows. 1

WARNING EWM01682

Keep hands, hair, and clothing away from rotating parts while the engine is running.

Do not touch or remove electrical parts when starting or during operation.

2

WARNING EWM01672

Read Owners Manuals and labels. Wear an approved personal flotation de-

vice (PFD).

Attach engine shut-off cord (lanyard) to your PFD, arm, or leg so the engine stops if you accidentally leave the helm, which could prevent a runaway boat.

EMU35133

Symbols The following symbols mean as follows.

Notice/Warning

1 2

ZMU06191

ZMU05696

12

General information

U6FN30E0.book Page 13 Wednesday, December 3, 2014 3:03 PM

Read Owners Manual

Hazard caused by continuous rotation

Electrical hazard

ZMU05664

ZMU05665

ZMU05666

13

Specifications and requirements

U6FN30E0.book Page 14 Wednesday, December 3, 2014 3:03 PM

EMU40501

Specifications TIP: (SUS) indicates that the specification is for the outboard motor when it is equipped with a stainless steel propeller. EMU2821V

Dimension and weight: Overall length:

817 mm (32.2 in) Overall width:

524 mm (20.6 in) Overall height L:

1629 mm (64.1 in) Motor transom height L:

516 mm (20.3 in) Dry weight (SUS) L:

176 kg (388 lb) Performance:

Full throttle operating range: 53006300 r/min

Rated power: 84.6 kW (115 HP)

Idle speed (in neutral): 700800 r/min

Power unit: Type:

4-stroke DOHC L4 16 valves Total displacement:

1832 cm (111.8 c.i.) Bore stroke:

81.0 88.9 mm (3.19 3.50 in) Ignition system:

TCI Spark plug (NGK):

LKR6E Spark plug gap:

0.80.9 mm (0.0310.035 in) Steering system:

Remote steering

Starting system: Electric starter

Starting carburetion system: Fuel injection

Valve clearance IN (cold engine): 0.170.24 mm (0.00670.0094 in)

Valve clearance EX (cold engine): 0.310.38 mm (0.01220.0150 in)

Battery rating (CCA/SAE): 3801150 A

Battery rating (MCA/ABYC): 5021370 A

Battery rating (RC/SAE): 124 minutes

Battery rating (CCA/EN): 4301080 A

Battery rating (20HR/IEC): 70 Ah

Maximum generator output: 35 A

Lower unit: Gear shift positions:

Forward-neutral-reverse Gear ratio:

2.15 (28/13) Trim and tilt system:

Power trim and tilt Propeller mark:

K Fuel and oil:

Recommended fuel: Regular unleaded gasoline

Min. pump octane number (PON): 86

Min. research octane number (RON): 90

Recommended engine oil: YAMALUBE 4M FC-W or 4-stroke outboard motor oil

14

Specifications and requirements

U6FN30E0.book Page 15 Wednesday, December 3, 2014 3:03 PM

Recommended engine oil grade 1: SAE 10W-30/10W-40/5W-30 API SG/SH/SJ/SL

Engine oil quantity (without oil filter replacement):

3.0 L (3.17 US qt, 2.64 Imp.qt) Engine oil quantity (with oil filter replacement):

3.2 L (3.38 US qt, 2.82 Imp.qt) Lubrication system:

Wet sump Recommended gear oil:

Yamalube Marine Gearcase Lube HD or Hypoid gear oil

Recommended gear oil grade: SAE 90 API GL-4 / SAE 80W API GL-5 / SAE 90 API GL-5

Gear oil quantity: 0.760 L (0.803 US qt, 0.669 Imp.qt)

Tightening torque: Spark plug:

25 Nm (2.55 kgf-m, 18.4 ft-lb) Propeller nut:

54 Nm (5.51 kgf-m, 39.8 ft-lb) Engine oil drain bolt:

27 Nm (2.75 kgf-m, 19.9 ft-lb) Engine oil filter:

18 Nm (1.84 kgf-m, 13.3 ft-lb) EMU33555

Installation requirements EMU33565

Boat horsepower rating

WARNING EWM01561

Overpowering a boat can cause severe in- stability.

Before installing the outboard motor(s), con- firm that the total horsepower of your out- board motor(s) does not exceed the boats maximum horsepower rating. See the boats capacity plate or contact the manufacturer.

EMU40491

Mounting outboard motor

WARNING EWM02501

Improper mounting of the outboard mo- tor could result in hazardous conditions such as poor handling, loss of control, or fire hazards.

Because the outboard motor is very heavy, special equipment and training is required to mount it sa