Yamaha V150TLR v4 Owner's Manual
en
V150
OWNERS MANUAL
64K-28199-13
U.S.A.Edition LIT-18626-06-99
U64K13 Hyoshi 06.2.9 16:23 1
EMU25060
ZMU01690
Read this owners manual carefully before operating your outboard motor.
U64K13 Hyoshi 06.2.9 16:23 2
Important manual information
EMU31280
To the owner
Thank you for choosing a Yamaha outboard motor. This Owners Manual contains infor- mation needed for proper operation, mainte- nance and care. A thorough understanding of these simple instructions will help you ob- tain maximum enjoyment from your new Yamaha. If you have any question about the operation or maintenance of your outboard motor, please consult a Yamaha dealer. In this Owners Manual particularly important information is distinguished in the following ways.
The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!
WARNING
EWM00780
Failure to follow WARNING instructions could result in severe injury or death to the machine operator, a bystander, or a person inspecting or repairing the out-
board motor.
CAUTION:
ECM00700
A CAUTION indicates special precautions that must be taken to avoid damage to the
outboard motor.
NOTE:
A NOTE provides key information to make
procedures easier or clearer.
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most current prod- uct information available at the time of print- ing, there may be minor discrepancies between your machine and this manual. If there is any question concerning this manu-
al, please consult your Yamaha dealer.
NOTE:
The V150TR and the standard accessories are used as a base for the explanations and illustrations in this manual. Therefore some
items may not apply to every model.
EMU25110
V150 OWNERS MANUAL
2006 by Yamaha Motor Corporation, USA 1st edition, April 2006
All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha Motor Corporation, USA
is expressly prohibited. Printed in Japan
P/N LIT-18626-06-99
Table of contents
General information .......................... 1
Identification numbers record.......... 1
Outboard motor serial number .......... 1 Key number....................................... 1
Emission control information ........... 1
North American models..................... 1 Star labels ......................................... 2
Safety information ........................... 3 Important labels............................... 4
Warning labels .................................. 4
Basic boating rules (Rules of the road) ........................ 5
Steering and sailing rules and sound signals.................................. 5
Rules when encountering vessels .... 6 Other special situations..................... 7
Fueling instructions ......................... 8
Gasoline............................................ 9 Engine oil .......................................... 9
Battery requirement......................... 9
Battery specifications ...................... 10
Propeller selection......................... 10 Start-in-gear protection ................. 10
Basic components .......................... 11
Main components.......................... 11
Remote control................................ 11 Remote control lever ....................... 12 Neutral interlock trigger ................... 12 Neutral throttle lever........................ 12 Choke switch................................... 13 Throttle friction adjuster................... 13 Engine stop lanyard switch ............. 13 Choke knob for pull type ................. 14 Main switch ..................................... 14 Power trim and tilt switch on
remote control or tiller handle ....... 14 Power trim and tilt switch on
bottom engine cowling .................. 15 Trim tab with anode ........................ 15 Tilt support lever for power trim
and tilt or hydro tilt model.............. 16 Top cowling lock lever
(pull up type) ................................. 16 Flushing device ............................... 16 Tachometer ..................................... 17
Digital tachometer ...........................17 Oil level indicators (three
indicators 2) ..................................17 Oil level indicator (digital type) ........18 Overheat warning indicator (digital
type) ..............................................18 Speedometer (digital type) ..............18 Trim meter .......................................19 Trim meter (digital type) ..................19 Hour meter (digital type)..................19 Trip meter ........................................20 Clock ...............................................20 Fuel gauge ......................................20 Fuel warning indicator .....................21 Low battery voltage warning
indicator ........................................21
Warning system ............................ 21
Overheat warning............................21 Oil level warning and oil filter
clogging warning ...........................22
Operation ......................................... 24
Installation..................................... 24
Mounting the outboard motor ..........24
Breaking in engine ........................ 25
Gasoline and engine oil mixing chart (50:1)....................................25
Procedure for oil injection models ...25
Preoperation checks ..................... 26
Fuel .................................................26 Oil ....................................................26 Controls...........................................26 Engine .............................................26 Operation after a long period of
storage ..........................................26
Filling fuel and engine oil .............. 27
Filling fuel for models without a fuel joint.........................................27
Ring Free Fuel Additive...................27 Filling oil for oil injection models......27 Oil level indicator operation.............29
Operating engine .......................... 30
Feeding fuel ....................................30 Starting engine ................................30
Warming up engine....................... 32
Choke start models .........................32
Table of contents
Shifting .......................................... 32
Forward (tiller handle and remote control models) ............................. 33
Reverse (automatic reverse lock and power trim and tilt models)..... 33
Stopping engine ............................ 33
Procedure ....................................... 33
Trimming outboard motor.............. 34
Adjusting trim angle ........................ 34 Adjusting boat trim .......................... 35
Tilting up and down ....................... 36
Procedure for tilting up.................... 36 Procedure for tilting down ............... 37
Cruising in shallow water .............. 38
Power trim and tilt models / power tilt models...................................... 38
Cruising in other conditions........... 39
Maintenance..................................... 40
Specifications ................................ 40 Transporting and storing outboard
motor ........................................... 41
Storing outboard motor ................... 41 Procedure ....................................... 42 Lubrication (oil injection models)..... 43 Battery care..................................... 43 Flushing power unit ......................... 43 Cleaning the outboard motor .......... 44 Checking painted surface of
motor............................................. 45
Periodic maintenance.................... 45
Replacement parts .......................... 45 Maintenance chart .......................... 46 Greasing ......................................... 48 Cleaning and adjusting spark
plug ............................................... 48 Checking fuel system...................... 49 Inspecting fuel filter ......................... 50 Cleaning fuel filter ........................... 50 Inspecting idling speed ................... 51 Checking water in engine oil tank ... 51 Checking wiring and connectors ..... 51 Exhaust leakage ............................. 51 Water leakage................................. 52 Checking power trim and tilt
system .......................................... 52
Checking propeller ..........................53 Removing the propeller ...................54 Installing the Propeller.....................54 Changing gear oil ............................54 Inspecting and replacing
anode(s)........................................55 Checking battery (for electric start
models) .........................................56 Connecting the battery ....................57 Disconnecting the battery................58 Checking top cowling ......................58 Coating the boat bottom..................58
Trouble Recovery............................ 59
Troubleshooting ............................ 59 Temporary action in emergency ... 62
Impact damage ...............................62 Replacing fuse ................................62 Power trim and tilt / power tilt will
not operate....................................63 Starter will not operate ....................63 Emergency starting engine .............64
Engine fails to operate .................. 65
Ignition system malfunction.............65 Low oil level warning activates........65
Treatment of submerged motor .... 66
Procedure........................................66
Consumer information ................... 68
Important warranty information for U.S.A. and Canada ..................... 68
YAMAHA MOTOR CORPORATION, U.S.A. OUTBOARD MOTOR TWO YEAR LIMITED WARRANTY ..... 70
IMPORTANT WARRANTY INFORMATION IF YOU USE YOUR YAMAHA OUTSIDE THE USA OR CANADA ...................... 73
1
General information
EMU25170
Identification numbers record
EMU25183
Outboard motor serial number
The outboard motor serial number is stamped on the label attached to the port side of the clamp bracket. Record your outboard motor serial number in the spaces provided to assist you in ordering spare parts from your Yamaha dealer or for reference in case your outboard motor is sto- len.
EMU25190
Key number
If a main key switch is equipped with the mo- tor, the key identification number is stamped on your key as shown in the illustration. Record this number in the space provided for reference in case you need a new key.
EMU25221
Emission control information
EMU25230
North American models
This engine conforms to U.S. Environmental Protection Agency (EPA) regulations for ma- rine SI engines. See the label affixed to your engine for details.
EMU30390
Approval label of emission control certif- icate
This label is attached to the bottom cowling. Existing Technology; N/A
1. Outboard motor serial number location
1. Key number
1. Approval label location
ZMU04666
1
General information
2
EMU25262
Manufactured date label
This label is attached to the clamp bracket or the swivel bracket.
EMU25272
Star labels
Your outboard motor is labeled with a Cali- fornia Air Resources Board (CARB) star la- bel. See below for a description of your
particular label.
EMU25280
One StarLow Emission
The one-star label identifies engines that meet the Air Resources Boards 2001 ex- haust emission standards. Engines meeting these standards have 75% lower emissions than conventional carbureted two-stroke en- gines. These engines are equivalent to the U.S. EPAs 2006 standards for marine en- gines.
EMU25290
Two StarsVery Low Emission
The two-star label identifies engines that meet the Air Resources Boards 2004 ex- haust emission standards. Engines meeting these standards have 20% lower emissions than One Star-Low-Emission engines.
1. Manufactured date label location
EMISSION CONTROL INFORMATION ENGINE FAMILY : THIS ENGINE CONFORMS TO 2001 U.S. EPA REGULATIONS FOR MARINE SI ENGINES. REFER TO THE OWNERS MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS. FELs : SPARK PLUG : DISPLACEMENT : ADVERTISED POWER :
IDLE SPEED : SPARK PLUG GAP (mm) : FUEL : GASOLINE VALVE LASH (mm) : IN : N/A EX : N/A
cm kW
g/kW-hr rpm IN NEUTRAL
3
ZMU05230
ZMU04669 1
Manufactured:
ZMU04346
1. Star labels location
1
ZMU04668
ZMU01702
General information
3
EMU25300
Three StarsUltra Low Emission
The three-star label identifies engines that meet the Air Resources Boards 2008 ex- haust emission standards. Engines meeting these standards have 65% lower emissions than One Star-Low-Emission engines.
EMU25362
Safety information
Before mounting or operating the outboard motor, read this entire manual. Reading it should give you an understanding of the motor and its operation.
Before operating the boat, read any own- ers or operators manuals supplied with it and all labels. Be sure you understand each item before operating.
Do not overpower the boat with this out- board motor. Overpowering the boat could result in loss of control. The rated power of
the outboard should be equal to or less than the rated horsepower capacity of the boat. If the rated horsepower capacity of the boat is unknown, consult the dealer or boat manufacturer.
Do not modify the outboard. Modifications could make the motor unfit or unsafe to use.
Incorrect propeller selection and incorrect use may not only cause engine damage, but also adversely affect fuel consumption. Consult your dealer for correct use.
Never operate after drinking alcohol or tak- ing drugs. About 50% of all boating fatali- ties involve intoxication.
Have an approved personal flotation de- vice (PFD) on board for every occupant. It is a good idea to wear a PFD whenever boating. At a minimum, children and non- swimmers should always wear PFDs, and everyone should wear PFDs when there are potentially hazardous boating condi- tions.
Gasoline is highly flammable, and its va- pors are flammable and explosive. Handle and store gasoline carefully. Make sure there are no gas fumes or leaking fuel be- fore starting the engine.
This product emits exhaust gases which contain carbon monoxide, a colorless, odorless gas which may cause brain dam- age or death when inhaled. Symptoms in- clude nausea, dizziness, and drowsiness. Keep cockpit and cabin areas well ventilat- ed. Avoid blocking exhaust outlets.
Check throttle, shift, and steering for prop- er operation before starting the engine.
Attach the engine stop switch lanyard cord to a secure place on your clothing, or your arm or leg while operating. If you acciden- tally leave the helm, the cord will pull from
ZMU01703
ZMU01704
General information
4
the switch, stopping the engine.
Know the marine laws and regulations where you will be boatingand obey them. For basic boating rules, see Rules of the road on page 5.
Stay informed about the weather. Check weather forecasts before boating. Avoid boating in hazardous weather.
Tell someone where you are going: leave a Float Plan with a responsible person. Be sure to cancel the Float Plan when you re- turn.
Use common sense and good judgment when boating. Know your abilities, and be sure you understand how your boat han- dles under the different boating conditions you may encounter. Operate within your limits, and the limits of your boat. Always operate at safe speeds, and keep a careful watch for obstacles and other traffic.
Always watch carefully for swimmers dur- ing the engine operation.
Stay away from swimming areas.
When a swimmer is in the water near you shift into neutral and shut off the engine.
Do not illegally discard empty containers used to replace or replenish oil. For the correct processing of empty containers, consult the dealer where you purchased the oil.
When replacing oils used to lubricate the product (engine or gear oil), be sure to wipe away any spilt oil. Never pour oil with- out using a funnel or similar device. If nec- essary, verify the necessary replacement procedure with the dealer.
Never illegally discard (dump) the product. Yamaha recommends consulting the deal- er on discarding the product.
Be informed about boating safety. Additional publications and information can be obtained
from many organizations, including the fol- lowing:
United States Coast Guard
Consumer Affairs Staff (G-BC) Office of Boating, Public, and Consumer Af- fairs U.S. Coast Guard Headquarters Washington, D.C. 20593-0001 Boating Safety Hotline: 1-800-368-5647
National Marine Manufacturers Associa- tion (NMMA)
401 N. Michigan Ave. Chicago, Il 60611
Marine Retailers Association of America
155 N. Michigan Ave. Chicago, Il 60601
EMU25382
Important labels
EMU25395
Warning labels
ZMU03928
ZMU01948
General information
5
EMU25401
Label
WARNING
EWM01260
Be sure shift control is in neutral before starting engine. (except 2HP)
Do not touch or remove electrical parts when starting or during operation.
Keep hands, hair, and clothes away from flywheel and other rotating parts
while engine is running.
EMU25451
Label
ENGINE OIL ONLY
Pour the engine oil into this oil tank, not gasoline.
RECOMMENDED OIL: YAMALUBE 2 STROKE OUTBOARD OIL or an equivalent TC-W3 certified ouboard oil.
WARNING
EWM01270
Do not add gasoline to the oil tank. Fire
explosion could result.
EMU25500
Basic boating rules (Rules of the road)
Just as there are rules which apply when you are driving on streets and high ways, there are waterway rules which apply when you are driving your boat. These rules are used internationally, and are also enforced by the United States Coast Guard and local agen- cies. You should be aware of these rules, and follow them whenever you encounter another vessel on the water. Several sets of rules prevail according to geographic location, but are all basically the same as the International Rules of the Road. The rules presented here in your Owners Manual are condensed, and have been pro- vided for your convenience only. Consult
your local U.S. Coast Guard Auxiliary or De- partment of Motor Vehicles for a complete set of rules governing the waters in which you will be using your boat.
EMU25510
Steering and sailing rules and sound signals
Whenever two vessels on the water meet one another, one vessel has the right-of- way; it is called the stand-on vessel. The vessel which does not have the right-of-way is called the give-way or burdened vessel. These rules determine which vessel has the right-of-way, and what each vessel should do.
Stand-on vessel
The vessel with the right-of-way has the duty to continue its course and speed, except to avoid an immediate collision. When you maintain your direction and speed, the other vessel will be able to determine how best to avoid you.
Give-way vessel
The vessel which does not have the right-of- way has the duty to take positive and timely action to stay out of the way of the Stand-On vessel. Normally, you should not cross in front of the vessel with the right-of-way. You should slow down or change directions brief- ly and pass behind the other vessel. You should always move in such a way that the operator of the other vessel can see what you are doing.
The general prudential rule
This rule is called Rule 2 in the International Rules and says, In obeying and construing these rules due regard shall be had to all dangers of naviga- tion and collision, and to any special circum- stances, which may render a departure from the above rules necessary in order to avoid immediate danger.
General information
6
In other words, follow the standard rules ex- cept when a collision will occur unless both vessels try to avoid each other. If that is the case, both vessels become Give-Way ves- sels.
EMU25520
Rules when encountering vessels
There are three main situations which you may encounter with other vessels which could lead to a collision unless the Steering Rules are followed:
Meeting:
(you are approaching another ves- sel head-on)
Crossing:
(you are traveling across the oth- er vessels path)
Overtaking:
(you are passing or being passed by another vessel) In the following illustration, your boat is in the center. You should give the right-of-way to any vessels shown in white area (you are the Give-Way vessel). Any vessels in the shad- ed area must yield to you (they are the Give- Way vessels). Both you and the meeting vessel must alter course to avoid each other.
Meeting
If you are meeting another power vessel head on, and are close enough to run the risk of collision, neither of you has the right-of- way! Both of you should alter course to avoid an accident. You should keep the other ves- sel on your port (left) side. This rule doesnt
apply if both of you will clear one another if you continue on your set course and speed.
Crossing
When two power driven vessels are crossing each others path close enough to run the risk of collision, the vessel which has the oth- er on the starboard (right) side must keep out of the way of the other. If the other vessel is on your right, you must keep out of its way; you are the Give-Way vessel. If the other vessel is on your port (left) side, remember that you should maintain course and direc- tion, provided the other vessel gives you the right-of-way as it should.
Overtaking
If you are passing another vessel, you are the Give-Way vessel. This means that the other vessel is expected to maintain its course and speed. You must stay out of its way until you are clear of it. Likewise, if an- other vessel is passing you, you should
General information
7
maintain your speed and direction so that the other vessel can steer itself around you.
EMU25530
Other special situations
There are three other rules you should be aware of when driving your boat around oth- er vessels.
Narrow channels and bends
When navigating in narrow channels, you should keep to the right when it is safe and practical to do so. If the operator of a power- driven vessel is preparing to go around a bend that may obstruct the view of other wa- ter vessels, the operator should sound a pro- longed blast on the whistle (4 to 6 seconds). If another vessel is around the bend, it too should sound the whistle. Even if no reply is heard, however, the vessel should still pro- ceed around the bend with caution. If you navigate such waters with your boat, you will need to carry a portable air horn, available from local marine supply stores.
Fishing vessel right-of-way
All vessels which are fishing with nets, lines or trawls are considered to be fishing ves- sels under the International Rules. Vessels with trolling lines are not considered fishing vessels. Fishing vessels have the right-of- way regardless of position. Fishing vessels cannot, however, impede the passage of other vessels in narrow channels.
Sailing vessel right-of-way
Sailing vessels should normally be given the right-of-way. The exceptions to this are: 1. When the sailing vessel is overtaking
the power-driven vessel, the power-driv- en vessel has the right-of-way.
2. Sailing vessels should keep clear of any fishing vessel.
3. In a narrow channel, a sailing vessel should not hamper the safe passage of a power-driven vessel which can navi-
gate only in such a channel.
Reading buoys and other markers
The waters of the United states are marked for safe navigation by the lateral system of buoyage. Simply put, buoys and markers have an arrangement of shapes, colors, numbers and lights to show which side of the buoy a boater should pass on when navigat- ing in a particular direction. The markings on these buoys are oriented from the perspec- tive of being entered from seaward (the boat- er is going towards the port). This means that red buoys are passed on the starboard (right) side when proceeding from open wa- ter into port, and black buoys are to port (left) side. When navigating out of port, your posi- tion with respect to the buoys should be re- versed; red buoys should be to port and black buoys to starboard. Many bodies of water used by boaters are entirely within the boundaries of a particular state. The Uniform State Waterway Marking System has been devised for these waters. This system uses buoys and signs with dis- tinctive shapes and colors to show regulato- ry or advisory information. These markers are white with black letters and orange boarders. They signify speed zones, restrict- ed areas, danger areas, and general infor- mation. Remember, markings may vary by geo- graphic location. Always consult local boat- ing authorities before driving your boat in unfamiliar waters.
General information
8
EMU25540
Fueling instructions
WARNING
EWM00010
GASOLINE AND ITS VAPORS ARE HIGH- LY FLAMMABLE AND EXPLOSIVE!
Do not smoke when refueling, and keep
away from sparks, flames, or other sources of ignition.
Stop engine before refueling.
Refuel in a well-ventilated area. Refuel portable fuel tanks off the boat.
Take care not to spill gasoline. If gaso- line spills, wipe it up immediately with
ZMU01708
General information
9
dry rags.
Do not overfill the fuel tank.
Tighten the filler cap securely after re- fueling.
If you should swallow some gasoline, inhale a lot of gasoline vapor, or get gasoline in your eyes, get immediate medical attention.
If any gasoline spills onto your skin, im- mediately wash with soap and water. Change clothing if gasoline spills on it.
Touch the fuel nozzle to the filler open- ing or funnel to help prevent electro-
static sparks.
CAUTION:
ECM00010
Use only new clean gasoline which has been stored in clean containers and is not contaminated with water or foreign mat-
ter.
EMU25570
Gasoline
If knocking or pinging occurs, use a different brand of gasoline or premium unleaded fuel.
Gasohol
There are two types of gasohol: gasohol con- taining ethanol and that containing metha- nol. Gasohol containing ethanol can be used if ethanol content does not exceed 10% and the fuel meets minimum octane ratings. Yamaha does not recommended gasohol containing methanol because it can cause fuel system damage or engine performance problems.
EMU25660
Engine oil
Use Yamalube 2-M outboard oil. If Ya- malube 2-M is not available, use only anoth- er outboard motor manufacturers factory- brand oil with TC-W3 rating.
CAUTION:
ECM01290
Serious engine damage can result from the use of lower quality oil, including some commonly available oil brands with TC-W3 on their label. To avoid the risk, use only Yamalube 2-M or, if necessary, another outboard motor manufacturers
factory-brand TC-W3 oil.
EMU25690
Battery requirement
CAUTION:
ECM01060
Do not use a battery that does not meet the specified capacity. If a battery which does not meet specifications is used, the electric system could perform poorly or be overloaded, causing electric system
damage.
For electric start models, choose a battery which meets the following specifications.
Recommended gasoline: Regular unleaded gasoline with a min- imum octane rating of 86 (Pump Oc- tane Number) = (R+M)/2
Recommended engine oil: YAMALUBE 2 STROKE OUTBOARD OIL
General information
10
EMU25711
Battery specifications
EMU25742
Propeller selection
The performance of your outboard motor will be critically affected by your choice of propel- ler, as an incorrect choice could adversely affect performance and could also seriously damage the motor. Engine speed depends on the propeller size and boat load. If engine speed is too high or too low for good engine performance, this will have an adverse effect on the engine. Yamaha outboard motors are fitted with pro- pellers chosen to perform well over a range of applications, but there may be uses where a propeller with a different pitch would be more appropriate. For a greater operating load, a smaller-pitch propeller is more suit- able as it enables the correct engine speed to be maintained. Conversely, a larger-pitch propeller is more suitable for a smaller oper- ating load. Yamaha dealers stock a range of propellers, and can advise you and install a propeller on your outboard that is best suited to your ap- plication.
NOTE:
Select a propeller which will allow the engine to reach the middle or upper half of the oper- ating range at full throttle with the maximum boat load. If operating conditions such as light boat loads then allow the engine r/min to rise above the maximum recommended range, reduce the throttle setting to maintain
the engine in the proper operating range.
For instructions on propeller removal and in- stallation, see page 53.
EMU25770
Start-in-gear protection
Yamaha outboard motors or Yamaha-ap- proved remote control units are equipped with start-in-gear protection device(s). This feature permits the engine to be started only when it is in neutral. Always select neutral before starting the engine.
Minimum cold cranking amps (CCA/ SAE):
380.0 A Minimum marine cranking amps (MCA/ ABYC):
502.0 A Minimum reserve capacity (RC/SAE):
124 minutes
1. Propeller diameter in inches 2. Propeller pitch in inches 3. Type of propeller (propeller mark)
ZMU04608
-x 1 2 3
11
Basic components
EMU25797
Main components NOTE:
* May not be exactly as shown; also may not be included as standard equipment on all mod-
els.
V150
EMU26180
Remote control
The remote control lever actuates both the shifter and the throttle. The electrical switch- es are mounted on the remote control box.
15
17
16
12 11 10
9 8
7 6
5
4
3 2
1
133
18
19
ZMU04671
14
1. Top cowling 2. Choke knob 3. Top cowling lock lever(s) 4. Clamp bracket 5. Anode 6. Cooling water inlet 7. Propeller* 8. Trim tab 9. Anti-cavitation plate 10. Tilt support lever 11. Flushing device 12. Power trim and tilt switch 13. Cooling water pilot hole 14. Remote control box (side mount type)*
15. Tachometer* 16. Trim meter* 17. Digital tachometer* 18. Digital speedometer* 19. Remote oil tank
Basic components
12
EMU26190
Remote control lever
Moving the lever forward from the neutral po- sition engages forward gear. Pulling the le- ver back from neutral engages reverse. The engine will continue to run at idle until the le- ver is moved about 35 (a detent can be felt). Moving the lever farther opens the throttle, and the engine will begin to accelerate.
EMU26201
Neutral interlock trigger
To shift out of neutral, first pull the neutral in- terlock trigger up.
EMU26211
Neutral throttle lever
To open the throttle without shifting into ei- ther forward or reverse, put the remote con- trol lever in the neutral position and lift the neutral throttle lever.
NOTE:
The neutral throttle lever will operate only when the remote control lever is in neutral. The remote control lever will operate only when the neutral throttle lever is in the closed
position.
1. Power trim and tilt switch 2. Remote control lever 3. Neutral interlock trigger 4. Neutral throttle lever 5. Main switch / choke switch 6. Engine stop lanyard switch 7. Throttle friction adjuster
1. Neutral
2. Forward
3. Reverse 4. Shift 5. Fully closed
6. Throttle 7. Fully open
1. Neutral interlock trigger
Basic components
13
EMU26221
Choke switch
To activate the choke system, press in the main switch while the key is turned to the (on) or (start) position. The choke system will then supply the rich fuel mixture required to start the engine. When the key is released, the choke will switch off automatically.
EMU25971
Throttle friction adjuster
A friction device provides adjustable resis- tance to movement of the throttle grip or the remote control lever, and can be set accord- ing to operator preference. To increase resistance, turn the adjuster clockwise. To decrease resistance, turn the
adjuster counterclockwise.
WARNING
EWM00031
Do not overtighten the friction adjuster. If there is too much resistance, it could be difficult to move the remote control lever or throttle grip, which could result in an
accident.
When constant speed is desired, tighten the adjuster to maintain the desired throttle set- ting.
EMU25990
Engine stop lanyard switch
The lock plate must be attached to the en- gine stop switch for the engine to run. The lanyard should be attached to a secure place on the operators clothing, or arm or leg. Should the operator fall overboard or leave the helm, the lanyard will pull out the lock plate, stopping ignition to the engine. This will prevent the boat from running away un- der power.
WARNING
EWM00120
Attach the engine stop switch lanyard to a secure place on your clothing, or your arm or leg while operating.
Do not attach the lanyard to clothing that could tear loose. Do not route the lanyard where it could become entan-
1. Fully open 2. Fully closed
ZMU03160
ZMU03169
Basic components
14
gled, preventing it from functioning.
Avoid accidentally pulling the lanyard during normal operation. Loss of en- gine power means the loss of most steering control. Also, without engine power, the boat could slow rapidly. This could cause people and objects in the
boat to be thrown forward.
NOTE:
The engine cannot be started with the lock
plate removed.
EMU26011
Choke knob for pull type
To supply the engine with the rich fuel mix- ture required to start, pull out this knob.
EMU26090
Main switch
The main switch controls the ignition system; its operation is described below.
(off)
With the main switch in the (off) posi- tion, the electrical circuits are off, and the key can be removed.
(on)
With the main switch in the (on) posi- tion, the electrical circuits are on, and the key cannot be removed.
(start)
With the main switch in the (start) po- sition, the starter motor turns to start the en- gine. When the key is released, it returns automatically to the (on) position.
EMU26141
Power trim and tilt switch on remote control or tiller handle
The power trim and tilt system adjusts the outboard motor angle in relation to the tran- som. Pressing the switch (up) trims the outboard motor up, then tilts it up. Pressing the switch (down) tilts the outboard mo- tor down and trims it down. When the switch is released, the outboard motor will stop in its current position.
NOTE:
For instructions on using the power trim and
tilt switch, see pages 34 and 36.
1. Lanyard 2. Lock plate
ZMU03903
Basic components
15
EMU26151
Power trim and tilt switch on bottom engine cowling
The power trim and tilt switch is located on the side of the bottom engine cowling. Press- ing the switch (up) trims the outboard motor up, then tilts it up. Pressing the switch (down) tilts the outboard motor down and trims it down. When the switch is re- leased, the outboard motor will stop in its current position.
WARNING
EWM01030
Use the power trim and tilt switch located on the bottom engine cowling only when the boat is at a complete stop with the en- gine off. Attempting to use this switch while the boat is moving could increase the risk of falling overboard and could distract the operator, increasing the risk of collision with another boat or an obsta-
cle.
NOTE:
For instructions on using the power trim and
tilt switch, see page 36.
EMU26241
Trim tab with anode
The trim tab should be adjusted so that the steering control can be turned to either the right or left by applying the same amount of force.
WARNING
EWM00840
An improperly adjusted trim tab could cause difficult steering. Always test run after the trim tab has been installed or re- placed to be sure steering is correct. Be sure you have tightened the bolt after ad-
justing the trim tab.
If the boat tends to veer the left (port side), turn the trim tab rear end to the port side A in the figure. If the boat tends to veer the right (starboard side), turn the trim tab end to the starboard side B in the figure.
CAUTION:
ECM00840
The trim tab also serves as an anode to protect the engine from electrochemical corrosion. Never paint the trim tab as it
will become ineffective as an anode.
UP
DN
ZMU03517
Basic components
16
EMU26340
Tilt support lever for power trim and tilt or hydro tilt model
To keep the outboard motor in the tilted up position, lock the tilt support lever to the clamp bracket.
EMU26382
Top cowling lock lever (pull up type)
To remove the engine top cowling, pull up the lock lever(s) and lift off the cowling. When installing the cowling, check to be sure it fits properly in the rubber seal. Then lock the cowling by moving the lever(s) down- ward.
EMU26460
Flushing device
This device is used to clean the cooling wa- ter passages of the motor using a garden hose and tap water.
NOTE:
For details on usage, see page 43.
1. Trim tab 2. Bolt 3. Cap
1. Tilt support lever
1
2
3
ZMU02525
A
B
A B
ZMU01863
ZMU03979
1
1. Top cowling lock lever(s)
1. Top cowling lock lever(s)
ZMU03904
1
ZMU03905
1
Basic components
17
EMU26470
Tachometer
This gauge shows the engine speed and has the following functions.
EMU26491
Digital tachometer
The tachometer shows the engine speed and has the following functions.
NOTE:
All segments of the display will light momen- tarily after the main switch is turned on and
will return to normal thereafter.
NOTE:
The water separator and engine trouble warning indicators only operate when the en- gine is equipped with the appropriate func-
tions.
EMU26540
Oil level indicators (three indicators 2)
The indicators on the gauge show the status of the oil level. For details on how to read the indicators, see page 29.
CAUTION:
ECM00030
Do not operate the engine without oil. Se-
rious engine damage will occur.
1. Flushing device
1. Tachometer 2. Oil level indicator
1
ZMU03940
ZMU04577
1
2
1. Tachometer 2. Trim meter 3. Hour meter 4. Oil level indicator 5. Overheat warning indicator 6. Water separator warning indicator 7. Engine trouble warning indicator 8. Set button 9. Mode button
6 7
2
4 98
5
3
1
ZMU01958
Basic components
18
EMU26550
Oil level indicator (digital type)
This indicator shows the engine oil level. If the oil level falls below the lower limit, the warning indicator will start to blink. For fur- ther information, see page 22.
CAUTION:
ECM00030
Do not operate the engine without oil. Se-
rious engine damage will occur.
EMU26581
Overheat warning indicator (digital type)
If the engine temperature rises too high, the warning indicator will start to blink. For fur- ther information on reading the indicator, see
page 21.
CAUTION:
ECM00050
Do not continue to run the engine if the overheat warning indicator is on. Serious
engine damage will occur.
EMU26600
Speedometer (digital type)
This gauge shows the boat speed.
NOTE:
After the main switch is first turned on, all segments of the display come on as a test. After a few seconds, the gauge will change to normal operation. Watch the gauge when
1. Oil level indicators
1. Oil level indicator
ZMU04580
1
1 ZMU01867
1. Overheat warning indicator
1. Speedometer 2. Fuel gauge 3. Trip meter/clock/voltmeter 4. Warning indicator(s)
1
ZMU01868
Basic components
19
turning on the main switch to make sure all
segments come on.
NOTE:
The speedometer displays km/h, mph, or knots, according to operator preference. Se- lect the desired unit of measurement by set- ting the selector switch on the back of the
gauge. See the illustration for settings.
EMU26610
Trim meter
This gauge shows the trim angle of your out- board motor.
NOTE:
Memorize the trim angles that work best for your boat under different conditions. Adjust the trim angle to the desired setting with the
power trim and tilt switch.
EMU26620
Trim meter (digital type)
This meter shows the trim angle of your out- board motor.
NOTE:
Memorize the trim angles that work best for your boat under different conditions. Adjust the trim angle to the desired using the power trim and tilt switch.
If the trim angle of your motor exceeds the trim operating range, the top segment on
the trim meter display will blink.
EMU26650
Hour meter (digital type)
This meter shows the number of hours the engine has been run. It can be set to show the total number of hours or the number of hours for the current trip. The display can also be turned on and off.
1. Cap 2. Selector switch (for speed unit) 3. Selector switc