Yamaha TW200N1, TW200N1C TW200 2022 Owner's Manual
![Yamaha TW200N1, TW200N1C TW200 2022 manual cover](/images/604d444aab36f7691eddbc72/thumbs/thumb175x175.webp)
During the first 600 miles, avoid full-throttle starts and rapid acceleration. Vary the engine speed and avoid prolonged high-speed operation. This helps in the proper seating of engine components.
It is recommended to use Yamalube 10W-40 or a high-quality engine oil that meets or exceeds API service classification SE, SF, SG, or higher.
Check the tire pressure before each ride or at least once a week. Proper tire pressure is crucial for safe handling and tire longevity.
Engine stalling at idle can be caused by a clogged air filter, incorrect idle speed setting, or fuel delivery issues. Inspect the air filter and adjust the idle speed. If the problem persists, consult a Yamaha technician.
The correct chain slack should be between 30-40 mm (1.2-1.6 inches). Ensure the motorcycle is on a level surface and the chain is properly lubricated when measuring.
The TW200 suspension is non-adjustable. However, you can improve comfort by ensuring the tires are at the correct pressure and by installing aftermarket suspension components if necessary.
First, check the headlight bulb to see if it needs replacing. Also, inspect the fuse and wiring connections for any damage or corrosion. Replace any defective parts as needed.
To winterize, clean the bike thoroughly, add fuel stabilizer to the gas tank, and run the engine for a few minutes. Remove the battery and store it in a warm place, and cover the bike to protect it from dust and moisture.
Strange noises during shifting can be due to improper clutch adjustment, low transmission oil, or worn-out gear components. Check and adjust the clutch cable and ensure the transmission oil is at the correct level.
The recommended maintenance schedule includes an oil change every 3,000 miles, checking the brakes and tires every 1,000 miles, and a full inspection every 6,000 miles. Always refer to the owner's manual for specific intervals and procedures.