Yamaha TW200L1, TW200L1C TW200 2020 Owner's Manual
![Yamaha TW200L1, TW200L1C TW200 2020 manual cover](/images/c966a941871dbba2e6268083/thumbs/thumb175x175.webp)
The recommended engine oil for the Yamaha TW200 2020 is Yamalube 10W-40 or any other 4-stroke motorcycle oil that meets or exceeds the API service classification of SG type or higher.
It is recommended to change the oil every 3,000 miles or every 6 months, whichever comes first, to ensure optimal performance and longevity of the engine.
The recommended tire pressure for the Yamaha TW200 2020 is 18 psi for the front tire and 22 psi for the rear tire.
To adjust the chain tension, place the bike on a stand, loosen the rear axle nut, adjust the chain tensioner bolts equally on both sides, and ensure 1.2 to 1.6 inches of slack in the chain. Retighten the axle nut to secure the adjustment.
If your Yamaha TW200 2020 won't start, check the fuel level, ensure the kill switch is in the 'Run' position, inspect the battery connections, and verify that the spark plug is clean and properly gapped.
To improve fuel efficiency, regularly maintain your motorcycle by keeping the engine tuned, ensuring proper tire pressure, using recommended oil, and avoiding rapid acceleration and heavy braking.
The Yamaha TW200 2020 uses an air-cooled engine, so it does not require liquid coolant. Ensure the engine fins are clean and free of obstructions for optimal air cooling.
To replace the air filter, remove the seat, unscrew the airbox cover, remove the old filter, and install a new one. Ensure the filter is seated correctly before securing the cover and seat.
The spark plug gap for the Yamaha TW200 2020 should be set between 0.6 to 0.7 mm (0.024 to 0.028 inches).
To check the battery health, use a multimeter to measure the voltage. A healthy battery should read between 12.6 to 12.8 volts when fully charged. If the voltage is below 12.4 volts, consider charging or replacing the battery.