Yamaha TT-R230X 2008 Owner's Manual
![Yamaha TT-R230X 2008 manual cover](/images/939c870e8dea7875d8254b29/thumbs/thumb175x175.webp)
For the Yamaha TT-R230X 2008, it is recommended to use a high-quality 10W-40 or 20W-50 4-stroke motorcycle oil. Ensure that the oil is suitable for wet clutch systems.
The air filter should be checked and cleaned every 20 hours of riding or more frequently if you are riding in dusty conditions.
The recommended tire pressure for the TT-R230X 2008 is 15 psi for the front tire and 15 psi for the rear tire.
To adjust the chain tension, loosen the rear axle nut, then turn the chain adjuster bolts evenly on both sides until the desired tension is achieved. Ensure there is about 1.4 inches of slack in the chain. Tighten the axle nut after adjustment.
The recommended spark plug for the Yamaha TT-R230X 2008 is NGK DR8EA or an equivalent. Ensure it is gapped correctly to 0.6-0.7 mm.
If your TT-R230X 2008 is not starting, check the fuel level, ensure the kill switch is in the 'run' position, inspect the spark plug, and check the battery connection. If the issue persists, consult a professional mechanic.
To store your TT-R230X 2008 for the winter, clean the bike thoroughly, change the oil, stabilize the fuel, disconnect the battery, and store it in a dry place. Consider covering it with a breathable motorcycle cover.
To change the brake pads, remove the caliper bolts, slide out the old pads, and insert new ones. Make sure the new pads align correctly and reattach the caliper securely. Test the brakes before riding.
The correct valve clearance for the Yamaha TT-R230X 2008 is 0.05-0.09 mm for the intake and 0.11-0.15 mm for the exhaust. Check and adjust them every 600 miles or as needed.
Brake fluid should be replaced every 1-2 years or as recommended in the owner's manual. Always use the specified DOT 4 brake fluid for the best performance.