Yamaha TT-R110EK TT-R110E 2019 Owner's Manual
![Yamaha TT-R110EK TT-R110E 2019 manual cover](/images/44b026b880bf77e9f66082de/thumbs/thumb175x175.webp)
Regular maintenance for the Yamaha TT-R110E includes checking the oil level, inspecting the air filter, tightening bolts, and lubricating the chain. Refer to the owner's manual for detailed instructions and maintenance intervals.
The Yamaha TT-R110E requires 10W-40 or 10W-30 motor oil that is suitable for wet clutches. It's recommended to use high-quality, motorcycle-specific oil for optimal performance.
If the TT-R110E doesn't start, check the fuel level, ensure the kill switch is off, inspect the spark plug, and verify the battery is charged. Clean or replace components as needed.
The recommended tire pressure for the TT-R110E is typically around 15 psi for the front tire and 15 psi for the rear tire. Always check the manual for specific recommendations.
To adjust the chain tension, loosen the axle nut, adjust the chain adjusters evenly on both sides, and ensure there is about 1-1.5 inches of slack. Tighten the axle nut after adjustment.
The recommended spark plug for the TT-R110E is an NGK CR6HSA or equivalent. Ensure the spark plug is gapped correctly according to the specifications in the owner's manual.
The air filter should be inspected every 15-30 hours of riding and replaced if it is dirty or damaged. Regular replacement ensures optimal engine performance and longevity.
If the suspension feels too stiff, check the suspension settings and adjust the preload if possible. Also, ensure that the suspension components are not damaged or require servicing.
To check the brake fluid level, locate the brake fluid reservoir, ensure the motorcycle is level, and check that the fluid is between the minimum and maximum lines. Top up with the correct brake fluid if necessary.
To winterize your TT-R110E, clean the bike thoroughly, change the oil, add fuel stabilizer, disconnect the battery, and store the bike in a dry place. Cover it to protect against dust and moisture.