Yamaha TT-R110EH TT-R110E 2017 Owner's Manual
![Yamaha TT-R110EH TT-R110E 2017 manual cover](/images/6c61696ca05cfa7558e43cc5/thumbs/thumb175x175.webp)
The recommended oil type for the Yamaha TT-R110E 2017 is Yamalube 4, 10W-40 or a similar 4-stroke engine oil.
The air filter should be checked and cleaned every 20 hours of riding or more frequently if riding in dusty conditions.
To adjust the chain tension, first loosen the rear axle nut, then adjust the chain adjusters on both sides of the swingarm equally, ensuring proper tension, and retighten the axle nut.
The recommended tire pressure for the TT-R110E is 15 psi for the front tire and 15 psi for the rear tire.
Check the fuel level, ensure the kill switch is in the 'RUN' position, the choke is used appropriately, and inspect the spark plug for fouling or damage.
After every ride, clean the bike, check for loose bolts, inspect the chain for proper tension and lubrication, and ensure all controls are functioning correctly.
To change the spark plug, remove the seat and fuel tank, disconnect the spark plug cap, use a spark plug wrench to remove the old plug, and install a new one with the correct gap.
The fuel capacity of the Yamaha TT-R110E 2017 is 1.0 gallons (3.8 liters).
To prevent rust, regularly clean the exhaust system, apply a high-temperature anti-corrosion spray, and store the bike in a dry place.
If the engine overheats, turn off the engine, allow it to cool, check the coolant levels if applicable, inspect for any leaks, and ensure the cooling fins are clean.