Yamaha TSX-10 Owner's Manual
![Yamaha TSX-10 Audio System manual cover](/images/obpXDcGjeHKReNxhlDNLSuHE/thumbs/thumb175x175.webp)
To set the alarm on the Yamaha TSX-10, press the 'ALARM' button on the top panel. Use the 'TUNING' knob to select the desired alarm time, then press 'ENTER' to confirm. Choose your alarm source (radio, buzzer, etc.) and adjust the volume as needed.
If your TSX-10 won't turn on, ensure it's plugged into a working outlet. Check the power cable for any damage. If everything appears fine, try resetting the system by unplugging it for a few minutes and then plugging it back in.
To improve FM reception, adjust the position of the FM antenna for the best signal. You can also try moving the unit to a different location or using an external FM antenna for better reception.
Ensure the volume is turned up and the correct source is selected. Check that the speakers are not muted. If using an external device, ensure it is properly connected. Try resetting the unit if the problem persists.
Yes, you can connect your smartphone to the Yamaha TSX-10 using an auxiliary cable. Connect the cable to the AUX IN jack on the back of the unit and the headphone jack on your smartphone.
To clean the TSX-10, use a soft, dry cloth. Avoid using any chemical cleaners or water directly on the unit. For tougher stains, slightly dampen the cloth with water and gently wipe the surface.
To reset the TSX-10, press and hold the 'POWER' button for about 10 seconds until the display turns off. Release the button and wait a few seconds before turning the unit back on.
To set the sleep timer, press the 'SLEEP' button on the remote control. Use the 'TUNING' knob to select the desired time (e.g., 30, 60, 90 minutes), then press 'ENTER' to activate the timer.
If the display shows 'NO DISC', ensure the CD is inserted correctly with the label facing up. Check for any dirt or scratches on the CD. Try another CD to determine if the issue is with the disc or the player.
Yes, insert a USB drive into the USB port on the front of the TSX-10. Use the 'SOURCE' button to select USB mode, and use the 'TUNING' knob to navigate and play the desired files.