Yamaha SilentBrass Personal Studio STX-2 Owner's Manual
![Yamaha SilentBrass Personal Studio STX-2 Accessory manual cover](/images/QFFgePrvSKjlAKpPrakJfska/thumbs/thumb175x175.webp)
To connect the Yamaha SilentBrass Personal Studio STX-2, insert the pickup mute into the bell of your instrument. Then, connect the mute to the input jack of the Personal Studio using the provided cable.
Ensure that the headphones are properly connected to the headphone jack on the STX-2. Check the volume level on the Personal Studio and ensure that the batteries are charged.
To replace the batteries, open the battery compartment located on the back of the Personal Studio unit. Replace the old batteries with two new AA alkaline batteries, ensuring correct polarity.
Yes, you can use rechargeable AA batteries with the STX-2. However, ensure that they are fully charged for optimal performance.
You can use any standard headphones with a 3.5 mm stereo plug. For best results, use high-quality headphones to experience the full range of sound.
Hold down the power button while simultaneously inserting the headphones into the STX-2. Keep holding the button until you see the indicator light flash. This will reset the device to factory settings.
First, ensure that the batteries are properly installed and have sufficient charge. If the issue persists, try replacing the batteries with new ones and check the battery contacts for any corrosion.
To clean the STX-2, use a soft, dry cloth to wipe the exterior surfaces. Avoid using any liquids or solvents that could damage the electronics.
Yes, you can connect the STX-2 to an external speaker using the line-out jack. Use an appropriate cable to connect the line-out to the input of your speaker system.
Yes, the STX-2 can be used with various brass instruments. Ensure you have the correct Silent Brass mute for your specific instrument model.