Yamaha RS90NW, RS90RW, RS90NRW, RS90MW RSG90GTW 2007 Owner's Manual
![Yamaha RS90NW, RS90RW, RS90NRW, RS90MW RSG90GTW 2007 manual cover](/images/84257c946056f4d6127c1ca0/thumbs/thumb175x175.webp)
To perform routine maintenance on your Yamaha RS90, regularly check the oil levels, inspect the drive belt for wear, and clean the air filter. Replace the spark plugs annually and ensure that the fuel system is free of debris.
If your Yamaha RS90 won't start, first check the battery connections and charge the battery if necessary. Ensure that the fuel valve is open and the kill switch is set to 'on'. Inspect the spark plug for fouling and replace it if needed.
If your Yamaha RS90 is overheating, check the coolant level and ensure there are no leaks. Clean the radiator and ensure the fan is operational. Inspect the thermostat and replace it if it is malfunctioning.
When storing your Yamaha RS90 for the off-season, drain the fuel or add a stabilizer, change the oil, and remove the battery. Keep it in a dry, covered space and ensure the snowmobile is elevated to prevent track damage.
To replace the drive belt on your Yamaha RS90, first remove the belt guard. Loosen the secondary clutch and remove the old belt. Install the new belt by placing it over the primary clutch and then onto the secondary clutch, ensuring proper tension.
For the Yamaha RS90, use a high-quality 4-stroke engine oil with a viscosity rating suitable for your climate, such as 0W-40 for cold conditions. Always refer to your owner's manual for specific recommendations.
To adjust the track tension on your Yamaha RS90, lift the rear of the snowmobile and loosen the lock nuts on the adjusters. Turn the adjusters to either tighten or loosen the track, ensuring even tension on both sides. Tighten the lock nuts once the desired tension is achieved.
If experiencing poor performance on your Yamaha RS90, inspect the air filter for blockages, ensure the fuel is fresh, and check for proper operation of the carburetor. Also, verify that the drive belt is not worn or damaged.
To improve fuel efficiency on your Yamaha RS90, maintain a steady speed, avoid rapid acceleration, and ensure that the engine is properly tuned. Keeping tires and the track properly inflated and aligned can also help.
For a new Yamaha RS90, follow the break-in procedure by running the engine at varied speeds for the first 10 hours, avoiding full-throttle operation. Gradually increase speed and load, and change the oil after the break-in period.