Yamaha MT09SPM, MT09SPMC MT 09 SP 2021 Owner's Manual
![Yamaha MT09SPM, MT09SPMC MT 09 SP 2021 manual cover](/images/3f1377d5bc8080540c99a665/thumbs/thumb175x175.webp)
The recommended oil type for the Yamaha MT-09 SP 2021 is a high-quality 10W-40, fully synthetic motorcycle oil. Ensure it meets the JASO MA standard for optimal performance.
Regular maintenance should occur every 6,000 kilometers or 3,700 miles, or once a year, whichever comes first. Always refer to your owner's manual for specific service intervals.
The recommended tire pressure is 36 psi for the front tire and 42 psi for the rear tire. Check tire pressure regularly to ensure safety and optimal handling.
The MT-09 SP 2021 comes with fully adjustable suspension. You can adjust the preload, rebound, and compression damping on both the front and rear suspension to suit your riding style and weight. Refer to the owner's manual for detailed instructions.
If your MT-09 SP 2021 won't start, check the battery, ensure the kill switch is in the 'Run' position, verify that the fuel level is adequate, and inspect the fuses. If the problem persists, consult a Yamaha service professional.
To reset the maintenance light, turn the ignition on, navigate to the settings menu on the dashboard, and select the 'Maintenance' option. Follow the prompts to reset the service interval.
During the first 1,000 kilometers (600 miles), avoid high RPMs, do not ride at a constant speed, and vary the engine load. This helps ensure proper engine break-in and longevity.
To improve fuel efficiency, maintain proper tire pressure, use recommended oil, ride at steady speeds, and avoid aggressive acceleration and braking. Regular maintenance also helps.
Use a high-quality ethylene glycol-based coolant that is specifically designed for aluminum engines. It should be mixed with distilled water in a 1:1 ratio unless premixed.
To check chain tension, measure the slack at the midpoint between the front and rear sprockets. The correct slack is typically 30-40mm. Adjust by loosening the axle nut and turning the adjuster bolts equally on both sides. Tighten the axle nut after adjustment.