Yamaha MT07K, MT07KC MT 07 2019 Owner's Manual
![Yamaha MT07K, MT07KC MT 07 2019 manual cover](/images/d843515663bb067cd4d0b30f/thumbs/thumb175x175.webp)
The recommended oil type for the Yamaha MT-07 2019 is Yamalube 10W-40 or any high-quality synthetic oil that meets API SG or higher, JASO MA standards.
To adjust the chain tension, first place the bike on a stand. Loosen the axle nut, adjust the tensioners equally on both sides, and tighten the axle nut to the specified torque. Ensure the chain slack is within the recommended range of 40-50mm.
The correct tire pressure for the Yamaha MT-07 2019 is 36 psi for the front tire and 42 psi for the rear tire.
To reset the trip meter on the Yamaha MT-07, press and hold the 'Select' button on the instrument panel until the trip meter resets to zero.
If the engine won't start, check the kill switch position, ensure the bike is in neutral, check the battery voltage, and inspect the fuel supply. If these steps don't help, consult a Yamaha service center.
It is recommended to service your Yamaha MT-07 every 4,000 miles or 6 months, whichever comes first. Regular maintenance includes oil changes, chain lubrication, and brake inspections.
The fuel tank capacity of the Yamaha MT-07 2019 is 14 liters (3.7 gallons).
To improve fuel efficiency, maintain a steady speed, avoid rapid acceleration, keep the tires properly inflated, and ensure regular maintenance is performed.
Use a high-quality ethylene glycol antifreeze coolant with corrosion inhibitors designed for aluminum engines, such as Yamaha's own coolant or an equivalent product.
To replace the headlight bulb, remove the headlight cover, disconnect the electrical connector, remove the old bulb, and install a new H4 bulb. Reconnect the electrical connector and replace the cover.