Yamaha FZS6X C FZ6 2008 Owner's Manual

To change the oil, place the bike on its center stand, remove the oil fill cap, drain the old oil by removing the drain bolt, replace the oil filter, and add new oil through the fill cap. Ensure the oil level is within the recommended range.
The recommended engine oil for the Yamaha FZS6X C FZ6 2008 is SAE 10W-40, API service SG type or higher.
First, check the battery for charge and connections. Ensure the kill switch is set to 'Run'. Verify the fuel level and the condition of the spark plugs. If the problem persists, consult a professional mechanic.
The recommended tire pressure is 36 psi for the front tire and 42 psi for the rear tire. Always check the tire pressure when the tires are cold.
The air filter should be inspected every 4,000 miles and replaced every 12,000 miles or sooner if riding in dusty conditions.
Common issues include electrical problems due to corroded connections, which can be resolved by cleaning and securing connections. Fuel system clogs may require cleaning the fuel tank and replacing the fuel filter.
To adjust the chain tension, place the bike on its center stand, loosen the axle nut, adjust the chain adjusters equally on both sides, and ensure the chain has about 1 inch of slack. Retighten the axle nut once adjusted.
Regular maintenance includes oil changes every 4,000 miles, air filter inspection every 4,000 miles, brake fluid replacement every 2 years, and coolant replacement every 2 years. Adjust schedules based on riding conditions.
To improve fuel efficiency, maintain proper tire pressure, perform regular maintenance, avoid aggressive acceleration, and use high-quality fuel.
Key torque specifications include: Front axle nut at 61 Nm, rear axle nut at 110 Nm, and oil drain bolt at 43 Nm. Always refer to the service manual for a complete list.