Yamaha FZ6RG, FZ6RGC FZ6R 2016 Owner's Manual
![Yamaha FZ6RG, FZ6RGC FZ6R 2016 manual cover](/images/3919b2e89292740b4663116c/thumbs/thumb175x175.webp)
The recommended tire pressures for the Yamaha FZ6R 2016 are 36 psi for the front tire and 42 psi for the rear tire.
To change the oil on a Yamaha FZ6R 2016, warm up the engine, place the bike on a stand, remove the drain plug, and let the oil drain. Replace the oil filter, reinstall the drain plug, and fill with the recommended oil type and quantity.
The regular maintenance interval for the Yamaha FZ6R 2016 is every 4,000 miles or every 6 months, whichever comes first. This includes oil changes, chain inspection, and tire pressure checks.
To adjust the chain tension, place the bike on a stand, loosen the rear axle nut, adjust the chain adjusters to achieve the correct slack (approximately 1.2-1.6 inches), and retighten the axle nut.
Use a high-quality ethylene glycol-based coolant that is silicate-free and specifically designed for aluminum engines in the Yamaha FZ6R 2016.
Check the battery connections, ensure the kill switch is in the run position, inspect the fuel level, and test the starter motor and spark plugs if your Yamaha FZ6R 2016 is experiencing starting issues.
To store the Yamaha FZ6R 2016 for winter, clean the bike thoroughly, change the oil, fill the fuel tank and add a fuel stabilizer, disconnect the battery, and cover the bike to protect it from dust.
To replace the brake pads on the Yamaha FZ6R 2016, remove the caliper bolts, slide out the old brake pads, insert the new pads, and reattach the caliper, ensuring the pads are properly seated.
If the Yamaha FZ6R 2016 overheats, stop the bike in a safe location, turn off the engine, let it cool down, check the coolant level, and inspect the radiator and hoses for leaks or blockages.
Remove the air filter cover, take out the air filter, clean it with compressed air or replace it if necessary, and ensure it is properly seated before reattaching the cover on the Yamaha FZ6R 2016.