Yamaha FZ07F, FZ07FC FZ 07 2015 Owner's Manual
![Yamaha FZ07F, FZ07FC FZ 07 2015 manual cover](/images/e448ec136162534e30fb9f41/thumbs/thumb175x175.webp)
To break in a new Yamaha FZ-07 engine, avoid high RPMs and rapid acceleration for the first 600 miles. Keep the engine speed below 5,000 RPM and vary the RPM frequently to ensure even wear.
The recommended tire pressure for the Yamaha FZ-07 is 33 psi for the front tire and 36 psi for the rear tire. Always check the tire pressure when the tires are cold.
It is recommended to change the oil every 4,000 miles or every 6 months, whichever comes first. Use the manufacturer's recommended oil type and replace the oil filter with each oil change.
If your FZ-07 doesn't start, check the battery voltage, ensure the kill switch is in the 'Run' position, and verify that the kickstand is up, and the bike is in neutral. If the problem persists, consult a professional mechanic.
Regularly clean and lubricate the chain every 600 miles or as needed, especially after riding in wet conditions. Check for proper tension and alignment, and adjust if necessary.
Signs that your FZ-07 may need a new battery include difficulty starting the engine, dimming headlights, and a clicking noise when trying to start. If any of these occur, test the battery's voltage.
To adjust the suspension on the FZ-07, use the pre-load adjusters on the front forks and rear shock absorber. Refer to the owner's manual for specific settings based on rider weight and riding conditions.
Use a high-quality ethylene glycol-based coolant suitable for aluminum engines. Ensure it is mixed at a 1:1 ratio with distilled water for optimal performance and protection.
To replace the air filter, remove the seat and fuel tank cover, unscrew the airbox lid, and replace the old filter with a new one. Ensure all components are securely reassembled.
If the ABS warning light stays on, check the ABS sensor connections and ensure the sensor rings are clean and undamaged. If the issue persists, have the ABS system inspected by a certified technician.