Yamaha FJR13ESL, FJR13ESLC FJR1300AE 2020 Owner's Manual

The recommended tire pressure for the Yamaha FJR1300AE 2020 is 42 psi for the front tire and 42 psi for the rear tire.
To perform an oil change, first warm up the engine, then turn it off and place the motorcycle on its center stand. Remove the oil drain bolt and oil filler cap to drain the oil. Replace the oil filter and reinstall the drain bolt. Finally, fill with new oil and check the level.
Yamaha recommends using Yamalube 4-S, 10W-40, or a similar high-quality motorcycle oil meeting or exceeding JASO MA standards.
First, check the battery condition and connections. Ensure the kill switch is in the "Run" position. Verify that the fuel level is adequate and the fuel is not stale. Inspect the fuses and ensure the side stand is up. If the issue persists, consult with a professional technician.
Valve clearance should be checked every 26,600 miles (42,800 km) as part of the regular maintenance schedule.
Adjust the suspension settings using the electronic suspension adjustment feature. Navigate through the menu on the instrument panel to select the desired setting for preload, damping, and load conditions.
Clean the chain with a non-corrosive chain cleaner and a soft brush. After cleaning, lubricate the chain with a high-quality motorcycle chain lubricant. Ensure the chain is properly tensioned and aligned as per the owner's manual.
To reset the trip meter, press and hold the "Trip" button on the instrument panel until the meter resets to zero.
If the ABS warning light remains on, first check the ABS fuse. If the fuse is intact, inspect the wheel speed sensors for dirt or damage. If the issue continues, have the ABS system inspected by a qualified technician.
To replace the air filter, remove the seat and the side panels to access the airbox. Open the airbox cover, remove the old air filter, and install a new one. Ensure the airbox is sealed properly before reassembling the panels and seat.