Yamaha FJ09G, FJ09GC FJ 09 2016 Owner's Manual
![Yamaha FJ09G, FJ09GC FJ 09 2016 manual cover](/images/d543c8e6631e8acc319cd5f3/thumbs/thumb175x175.webp)
To adjust the suspension on your Yamaha FJ09G, locate the preload adjusters on the front forks and rear shock. Use the appropriate tool to turn the adjusters clockwise to increase preload or counterclockwise to decrease it. Refer to the owner's manual for specific settings and recommendations.
For the Yamaha FJ09GC, it's recommended to use a high-quality 10W-40 synthetic motorcycle oil. Ensure that the oil meets the JASO MA standard for wet clutch compatibility. Always check the owner's manual for the manufacturer's recommendations.
The air filter on the FJ 09 2016 should typically be inspected every 6,000 miles and replaced if necessary. Riding in dusty or harsh conditions may require more frequent checks and replacements.
If your Yamaha FJ09G won't start, first check the battery to ensure it's charged. Verify that the kill switch is in the 'RUN' position and check the fuel level. Inspect the fuses and ensure the bike is in neutral or the clutch is pulled in if in gear.
The recommended tire pressure for the Yamaha FJ09GC is typically 36 psi for the front tire and 42 psi for the rear tire. Always refer to the owner's manual or the sticker on the swingarm for the most accurate specifications.
To perform an oil change on your FJ 09 2016, warm up the engine, place a drain pan under the engine, and remove the drain plug. Allow the oil to fully drain, replace the drain plug, and install a new oil filter. Fill the engine with the recommended amount of new oil, and check for leaks.
If your FJ09G is overheating, check the coolant level and top it off if necessary. Inspect the radiator for blockages and ensure the cooling fan is operating correctly. Avoid riding in stop-and-go traffic for extended periods and consider having the cooling system checked by a professional if the problem persists.
To improve fuel efficiency on your Yamaha FJ09GC, ensure regular maintenance such as air filter cleaning, correct tire pressure, and timely oil changes. Riding smoothly, avoiding rapid acceleration, and maintaining a steady speed can also enhance fuel efficiency.
A rattling noise on your FJ 09 2016 could be due to loose components, such as the exhaust system, fairings, or engine bolts. Inspect these areas and tighten any loose parts. If the noise persists, consider consulting a Yamaha service center for a thorough inspection.
To adjust the chain tension on your Yamaha FJ09G, place the bike on a center stand or paddock stand. Loosen the axle nut, adjust the chain tensioner bolts evenly on both sides, ensuring the chain has the correct slack as per the manual. Tighten the axle nut and recheck the tension.