Yamaha F15SMHA v7 Owner's Manual
en
Read this manual carefully before operating this outboard motor.
OWNERS MANUAL
F15 F20
LIT-18626-10-16 6AG-28199-3A-E0
6AG-9-3A-1E0.book 1
EMU25063
ZMU07696
Les gaz dchappement du moteur de ce produit contiennent des substances chimiques connues dans ltat de Californie pour provoquer le cancer, des anomalies congnitales et des troubles de la reproduction.
Read this manual carefully before operating this outboard motor. Keep this manual onboard in a waterproof bag when boating. This manual should stay with the outboard motor if it is sold.
6AG-9-3A-1E0.book 1
Important manual information EMU44140
To the owner Thank you for selecting a Yamaha outboard motor. This Owners Manual contains infor- mation needed for proper operation, mainte- nance and care. A thorough understanding of these simple instructions will help you ob- tain maximum enjoyment from your new Yamaha. If you have any question about the operation or maintenance of your outboard motor, please consult a Yamaha dealer. In this Owners Manual particularly important information is distinguished in the following ways.
: This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that fol- low this symbol to avoid possible injury or death.
WARNING EWM00781
A WARNING indicates a hazardous situa- tion which, if not avoided, could result in death or serious injury.
NOTICE ECM00701
A NOTICE indicates special precautions that must be taken to avoid damage to the outboard motor or other property.
TIP: A TIP provides key information to make pro- cedures easier or clearer.
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most current prod- uct information available at the time of print- ing, there may be minor discrepancies between your machine and this manual. If
there is any question concerning this manu- al, please consult your Yamaha dealer. To ensure long product life, Yamaha recom- mends that you use the product and perform the specified periodic inspections and main- tenance by correctly following the instruc- tions in the owners manual. Any damage resulting from neglect of these instructions is not covered by warranty. Some countries have laws or regulations re- stricting users from taking the product out of the country where it was purchased, and it may be impossible to register the product in the destination country. Additionally, the war- ranty may not apply in certain regions. When planning to take the product to another coun- try, consult the dealer where the product was purchased for further information. If you purchased this outboard motor used, see your Yamaha dealer to have it registered in your name in Yamaha records.
TIP: The F15EHA, F15MHA, F15PHA, F20EA, F20EHA, F20MHA, F20PA, F20PHA, and the standard accessories are used as a base for the explanations and illustrations in this manual. Therefore some items may not ap- ply to every model. EMU44150
F15, F20 OWNERS MANUAL
2013 by Yamaha Motor Co., Ltd. 1st Edition, May 2013 All rights reserved.
Any reprinting or unauthorized use without the written permission of
Yamaha Motor Co., Ltd. is expressly prohibited.
Printed in Japan
6AG-9-3A-1E0.book 1
Table of contents Safety information............................. 1
Outboard motor safety ..................... 1 Propeller............................................ 1 Rotating parts.................................... 1 Hot parts ........................................... 1 Electric shock.................................... 1 Power tilt ........................................... 1 Engine shut-off cord (lanyard)........... 1 Gasoline............................................ 1 Gasoline exposure and spills ............ 2 Carbon monoxide.............................. 2 Modifications ..................................... 2
Boating safety .................................. 2 Alcohol and drugs ............................. 2 Personal flotation devices (PFDs)..... 2 People in the water ........................... 2 Passengers ....................................... 2 Overloading....................................... 2 Avoid collisions ................................. 3 Weather ............................................ 3 Accident reporting ............................. 3 Boat education and training .............. 3 Passenger training ............................ 4 Boating safety publications ............... 4 Laws and regulations ........................ 4
Boating organizations....................... 4 Basic boating rules (Rules of the
road)............................................... 5 Steering and sailing rules and
sound signals.................................. 5 Rules when encountering vessels .... 5 Other special situations..................... 6
General information .......................... 9 Identification numbers record........... 9
Outboard motor serial number .......... 9 Key number....................................... 9
Read manuals and labels............... 10 Warning labels ............................... 10
Specifications and requirements.................................... 13
Specifications ................................. 13 Installation requirements ................ 15
Boat horsepower rating................... 15 Mounting motor ............................... 15
Remote control requirements......... 15 Battery requirements...................... 16
Specifications of Battery.................. 16 Mounting battery ............................. 16 Multiple batteries ............................. 16 Without a rectifier or Rectifier
Regulator ...................................... 16 Propeller selection ......................... 16 Start-in-gear protection .................. 17 Engine oil requirements ................. 17 Fuel requirements .......................... 18
Gasoline .......................................... 18 Gasoline Additives .......................... 19
Muddy or acidic water .................... 20 Anti-fouling paint ............................ 20 Motor disposal requirements.......... 20 Emergency equipment ................... 20 Emission control information ......... 20
North American models................... 20 Star labels ....................................... 21
Components .................................... 23 Components diagram..................... 23
Fuel tank ......................................... 24 Fuel joint.......................................... 25 Fuel gauge ...................................... 25 Pressure relief tab ........................... 25 Fuel tank cap................................... 25 Air vent screw.................................. 25 Remote control box ......................... 25 Remote control lever ....................... 25 Neutral interlock trigger ................... 26 Neutral throttle lever........................ 26 Tiller handle .................................... 26 Gear shift lever ............................... 26 Throttle grip .................................... 27 Throttle indicator ............................ 27 Throttle friction adjuster................... 27 Engine shut-off cord (lanyard) and
clip................................................. 28 Engine stop button ......................... 28 Manual starter handle ..................... 29 Starter button .................................. 29 Main switch ..................................... 29 Power tilt switch .............................. 29 Steering friction adjuster ................. 30
6AG-9-3A-1E0.book 1
Table of contents Trim tab........................................... 31 Trim rod (tilt pin) .............................. 31 Tilt lock mechanism ........................ 31 Tilt support knob ............................. 32 Tilt support bar ................................ 32 Power tilt unit .................................. 32 Cowling lock lever (pull up type) ..... 33 Flushing device ............................... 33 Alert indicator ................................. 33
Instruments and indicators ............ 34 Indicators ....................................... 34
Low oil pressure-alert indicator ....... 34 Overheat-alert indicator .................. 34
Engine control system.................... 35 Alert system ................................... 35
Overheat alert ................................. 35 Low oil pressure alert ...................... 35
Installation ....................................... 37 Installation ...................................... 37
Mounting the outboard motor .......... 37 Clamping the outboard motor ......... 39
Operation ......................................... 40 First-time operation ........................ 40
Fill engine oil ................................... 40 Breaking in engine .......................... 40 Getting to know your boat ............... 40
Checks before starting engine ....... 40 Fuel level......................................... 40 Remove the top cowling.................. 41 Fuel system..................................... 41 Controls........................................... 41 Engine shut-off cord (lanyard)......... 42 Engine oil ........................................ 42 Engine............................................. 43 Flushing device ............................... 43 Install top cowling............................ 43 Checking power tilt system ............. 43 Battery............................................. 44
Filling fuel ....................................... 44 Operating engine............................ 46
Sending fuel (portable tank) ............ 46 Starting engine................................ 48
Checks after starting engine .......... 52 Cooling water .................................. 52
Warming up engine........................ 53 Manual start and electric start
models .......................................... 53 Checks after engine warm up ........ 53
Shifting ............................................ 53 Stop switches .................................. 53
Shifting ........................................... 53 Stopping boat................................. 55 Stopping engine............................. 55
Procedure........................................ 55 Trimming outboard motor............... 56
Adjusting trim angle for manual tilt models .......................................... 57
Adjusting trim angle (power tilt models) ......................................... 57
Adjusting boat trim .......................... 58 Tilting up and down........................ 59
Procedure for tilting up (manual tilt models) ......................................... 59
Procedure for tilting up (power tilt models) ......................................... 60
Procedure for tilting down (manual tilt models)..................................... 61
Procedure for tilting down (power tilt models)..................................... 62
Shallow water ................................ 62 Cruising in shallow water (manual
tilt models)..................................... 62 Power tilt models............................. 64
Cruising in other conditions............ 65 Maintenance .................................... 66
Transporting and storing outboard motor............................................ 66
Dismounting the outboard motor..... 66 Storing outboard motor ................... 67 Procedure........................................ 68 Lubrication....................................... 69 Cleaning and anticorrosion
measures ...................................... 69 Flushing power unit ......................... 69 Cleaning the outboard motor........... 70 Checking painted surface of
outboard motor.............................. 70 Periodic maintenance .................... 70
Replacement parts .......................... 71
6AG-9-3A-1E0.book 2
Table of contents Maintenance interval guidelines...... 71 Maintenance chart 1 ....................... 72 Maintenance chart 2 ....................... 74 Greasing ......................................... 75 Cleaning and adjusting spark
plug ............................................... 76 Checking fuel filter .......................... 77 Inspecting idle speed ...................... 77 Changing engine oil ........................ 78 Inspecting wiring and connectors.... 80 Checking propeller .......................... 80 Removing propeller ......................... 81 Installing propeller ........................... 81 Changing gear oil ............................ 82 Inspecting and replacing
anode(s)........................................ 83 Checking battery (for electric start
models) ......................................... 83 Connecting the battery .................... 84 Disconnecting the battery ............... 84
Trouble Recovery............................ 86 Troubleshooting ............................. 86 Temporary action in emergency..... 89
Impact damage ............................... 89 Replacing fuse ................................ 89 Power tilt will not operate ................ 90 Starter will not operate .................... 90 Emergency starting engine
(manual starter model).................. 91 Emergency starting engine
(electric start model) ..................... 92 Treatment of submerged motor...... 94
Consumer information.................... 95 YAMAHA FOUR-STROKE
OUTBOARD MOTOR THREE-YEAR LIMITED WARRANTY................................. 95
IMPORTANT WARRANTY INFORMATION IF YOU USE YOUR YAMAHA OUTSIDE THE U.S.A. OR CANADA ............ 97
6AG-9-3A-1E0.book 3
1
Safety information EMU33622
Outboard motor safety Observe these precautions at all times. EMU36501
Propeller People can be injured or killed if they come in contact with the propeller. The propeller can keep moving even when the motor is in neutral, and sharp edges of the propeller can cut even when stationary. Stop the engine when a person is in the
water near you. Keep people out of reach of the propeller,
even when the engine is off. EMU33630
Rotating parts Hands, feet, hair, jewelry, clothing, PFD straps, etc. can become entangled with inter- nal rotating parts of the engine, resulting in serious injury or death. Keep the top cowling in place whenever pos- sible. Do not remove or replace the cowling with the engine running. Only operate the engine with the cowling re- moved according to the specific instructions in the manual. Keep hands, feet, hair, jewel- ry, clothing, PFD straps, etc. away from any exposed moving parts. EMU33640
Hot parts During and after operation, engine parts are hot enough to cause burns. Avoid touching any parts under the top cowling until the en- gine has cooled. EMU33650
Electric shock Do not touch any electrical parts while start- ing or operating the engine. They can cause shock or electrocution. EMU34790
Power tilt Body parts can be crushed between the mo-
tor and the clamp bracket when the motor is trimmed or tilted. Keep body parts out of this area at all times. Be sure no one is in this area before operating the power tilt mecha- nism. The power tilt switches operate even when the main switch is off. Keep people be away from the switches whenever working around the motor. Never get under the lower unit while it is tilt- ed, even when the tilt support lever or knob is locked. Severe injury could occur if the outboard motor accidentally falls. EMU33671
Engine shut-off cord (lanyard) Attach the engine shut-off cord so that the engine stops if the operator falls overboard or leaves the helm. This prevents the boat from running away under power and leaving people stranded, or running over people or objects. Always attach the engine shut-off cord to a secure place on your clothing or your arm or leg while operating. Do not remove it to leave the helm while the boat is moving. Do not at- tach the cord to clothing that could tear loose, or route the cord where it could be- come entangled, preventing it from function- ing. Do not route the cord where it is likely to be accidentally pulled out. If the cord is pulled during operation, the engine will shut off and you will lose most steering control. The boat could slow rapidly, throwing people and ob- jects forward. EMU33810
Gasoline Gasoline and its vapors are highly flam- mable and explosive. Always, refuel ac- cording to the procedure on page 46 to reduce the risk of fire and explosion.
6AG-9-3A-1E0.book 1
Safety information
2
EMU33820
Gasoline exposure and spills Take care not to spill gasoline. If gasoline spills, wipe it up immediately with dry rags. Dispose of rags properly. If any gasoline spills onto your skin, immedi- ately wash with soap and water. Change clothing if gasoline spills on it. If you swallow gasoline, inhale a lot of gaso- line vapor, or get gasoline in your eyes, get immediate medical attention. Never siphon fuel by mouth. EMU33900
Carbon monoxide This product emits exhaust gases which con- tain carbon monoxide, a colorless, odorless gas which may cause brain damage or death when inhaled. Symptoms include nausea, dizziness, and drowsiness. Keep cockpit and cabin areas well ventilated. Avoid blocking exhaust outlets. EMU33780
Modifications Do not attempt to modify this outboard mo- tor. Modifications to your outboard motor may reduce safety and reliability, and render the outboard unsafe or illegal to use. EMU33740
Boating safety This section includes a few of the many im- portant safety precautions that you should follow when boating. EMU33710
Alcohol and drugs Never operate after drinking alcohol or taking drugs. Intoxication is one of the most com- mon factors contributing to boating fatalities. EMU40280
Personal flotation devices (PFDs) Have an approved PFD on board for every occupant. Yamaha recommends that you must wear a PFD whenever boating. At a
minimum, children and non-swimmers should always wear PFDs, and everyone should wear PFDs when there are potentially hazardous boating conditions. EMU33731
People in the water Always watch carefully for people in the wa- ter, such as swimmers, skiers, or divers, whenever the engine is running. When someone is in the water near the boat, shift into neutral and stop the engine. Stay away from swimming areas. Swimmers can be hard to see. The propeller can keep moving even when the motor is in neutral. Stop the engine when a person is in the water near you. EMU33751
Passengers Consult your boat manufacturers instruc- tions for details about appropriate passenger locations in your boat and be sure all pas- sengers are positioned properly before ac- celerating and when operating above an idle speed. Standing or sitting in non-designated locations may result in being thrown either overboard or within the boat due to waves, wakes, or sudden changes in speed or direc- tion. Even when people are positioned prop- erly, alert your passengers if you must make any unusual maneuver. Always avoid jump- ing waves or wakes. EMU33760
Overloading Do not overload the boat. Consult the boat capacity plate or boat manufacturer for max- imum weight and number of passengers. Be sure that weight is properly distributed ac- cording to the boat manufacturers instruc- tions. Overloading or incorrect weight distribution can compromise the boats han- dling and lead to an accident, capsizing or swamping.
6AG-9-3A-1E0.book 2
Safety information
3
EMU33772
Avoid collisions Scan constantly for people, objects, and oth- er boats. Be alert for conditions that limit your visibility or block your vision of others.
Operate defensively at safe speeds and keep a safe distance away from people, ob- jects, and other boats. Do not follow directly behind other boats or
waterskiers. Avoid sharp turns or other maneuvers that
make it hard for others to avoid you or un- derstand where you are going.
Avoid areas with submerged objects or shallow water.
Ride within your limits and avoid aggres- sive maneuvers to reduce the risk of loss of control, ejection, and collision.
Take early action to avoid collisions. Re- member, boats do not have brakes, and stopping the engine or reducing throttle can reduce the ability to steer. If you are not sure that you can stop in time before hitting an obstacle, apply throttle and turn in another direction.
EMU33790
Weather Stay informed about the weather. Check weather forecasts before boating. Avoid boating in hazardous weather.
EMU44160
Accident reporting Boat operators are required by law to file a Boating Accident Report with their boating law enforcement agency if their boat is in- volved in any of the following accidents: 1. There is loss of life or probable loss of
life. 2. There is personal injury that requires
medical attention beyond first aid. 3. There is property damage to boats or
other property over a certain amount. 4. There is complete loss of a boat. Contact local law enforcement personnel if a report is necessary. EMU44170
Boat education and training For U.S.A. Operators should take a boating safety course. This may be required in your state. Many of the organizations listed in the next section can provide information about cours- es in your area. You may also want to consider an Internet- based program for basic boater education. The Online Boating Safety Course provided by the BoatU.S. Foundation, is approved by the National Association of State Boating Law Administrators (NASBLA) and recog- nized by the United States Coast Guard. Most, but not all, states accept this course to meet their minimum requirements. While it cannot replace an in-depth course such as one offered by the U.S. Coast Guard, U.S. Power Squadron, or other organization, this online course does provide a general over- view of the basics in boating safety, require- ments, navigation, and operation. Upon successful completion of the course, the user can download a certificate of comple- tion immediately or, for a small charge, re- quest one by mail. To take this free course,
ZMU06025
6AG-9-3A-1E0.book 3
Safety information
4
go to boatus.org. For Canada All operators of pleasure craft must illustrate competency by means of a Pleasure Craft Operators Card with the exception of Per- sonal Water Craft used for rental purposes which require a rental checklist be complet- ed. Pleasure Craft Operators Cards can be obtained following the completion of a com- petency course, with an on-line option. De- tails can be found on Transport Canadas website. www.tc.gc.ca EMU33880
Passenger training Make sure at least one other passenger is trained to operate the boat in the event of an emergency. EMU33890
Boating safety publications Be informed about boating safety. Additional publications and information can be obtained from many boating organizations. EMU33590
Laws and regulations Know the marine laws and regulations where you will be boating- and obey them. Several sets of rules prevail according to geographic location, but all are basically the same as the International Rules of the Road. The rules presented in the following section are con- densed- and have been provided for your convenience only. Contact the U.S. Coast Guard, the National Association of State Boating Law Adminis- trators, or your local Power Squadron for a complete set of rules governing the waters in which you will be using your boat. EMU44180
Boating organizations The following organizations provide boating safety training and information about boating safety and laws.
In the U.S.A. United States Coast Guard Consumer Affairs Staff (G-BC) Office of Boating, Public, and Consumer Af- fairs U.S. Coast Guard Headquarters Washington, D.C. 20593-0001 http://www.uscgboating.org/
United States Power Squadrons 1-888-FOR-USPS (1-888-367-8777) http://www.usps.org/
Boat Owners Association of The United States 1-800-336-BOAT (1-800-336-2628) http://www.boatus.com/
National Association of State Boating Law Administrators (NASBLA) 1500 Leestown Road, Suite 330 Lexington, KY 40511 859-225-9497 http://www.nasbla.org/
National Marine Manufacturers Associa- tion (NMMA) 200 East Randolph Drive Suite 5100 Chicago, IL 60601 http://www.nmma.org/
Marine Retailers Association of America 155 N. Michigan Ave. Chicago, IL 60304 http://www.mraa.com/
In the Canada National Marine Manufacturers Associa- tion Canada 14 McEwan Drive
6AG-9-3A-1E0.book 4
Safety information
5
Suite 8 Bolton, ON L7E 1H1 http://www.nmma.org/
EMU33691
Basic boating rules (Rules of the road)
Just as there are rules that apply when you are driving on streets and highways, there are waterway rules that apply when you are driving your boat. These rules are used inter- nationally. (For U.S.A.: and are also en- forced by the United States Coast Guard and local agencies.) You should be aware of these rules, and follow them whenever you encounter another vessel on the water. EMU33700
Steering and sailing rules and sound signals Whenever two vessels on the water meet one another, one vessel has the right-of- way; it is called the stand-on vessel. The vessel that does not have the right-of-way is called the give-way or burdenedvessel. These rules determine which vessel has the right-of-way, and what each vessel should do.
Stand-on vessel The vessel with the right-of-way has the duty to continue its course and speed, except to avoid an immediate collision. When you maintain your direction and speed, the other vessel will be able to determine how best to avoid you.
Give-way vessel The vessel that does not have the right-of- way has the duty to take positive and timely action to stay out of the way of the Stand-On
vessel. Normally, you should not cross in front of the vessel with the right-of-way. You should slow down or change directions brief- ly and pass behind the other vessel. You should always move in such a way that the operator of the other vessel can see what you are doing. The general prudential rule This rule is called Rule 2 in the International Rules and says, In obeying and construing these rules due regard shall be had to all dangers of naviga- tion and collision, and to any special circum- stances, which may render a departure from the above rules necessary in order to avoid immediate danger. In other words, follow the standard rules ex- cept when a collision will occur unless both vessels try to avoid each other. If that is the case, both vessels become Give-Way vessels. EMU25521
Rules when encountering vessels There are three main situations that you may encounter with other vessels which could lead to a collision unless the Steering Rules are followed: Meeting: (you are approaching another ves- sel head-on) Crossing: (you are traveling across the oth- er vessels path) Overtaking: (you are passing or being passed by another vessel) In the following illustration, your boat is in the center. You should give the right-of-way to any vessels shown in white area (you are the Give-Way vessel). Any vessels in the shad- ed area must yield to you (they are the Give- Way vessels). Both you and the meeting vessel must alter course to avoid each other.
6AG-9-3A-1E0.book 5
Safety information
6
Meeting If you are meeting another power vessel head on, and are close enough to run the risk of collision, neither of you has the right-of- way Both of you should alter course to avoid an accident. You should keep the other ves- sel on your port (left) side. This rule doesnt apply if both of you will clear one another if you continue on your set course and speed.
Crossing When two power driven vessels are crossing each others path close enough to run the risk of collision, the vessel which has the oth- er on the starboard (right) side must keep out of the way of the other. If the other vessel is on your right, you must keep out of its way; you are the Give-Way vessel. If the other vessel is on your port (left) side, remember that you should maintain course and direc- tion, provided the other vessel gives you the right-of-way as it should.
Overtaking If you are passing another vessel, you are the Give-Way vessel. This means that the other vessel is expected to maintain its course and speed. You must stay out of its way until you are clear of it. Likewise, if an- other vessel is passing you, you should maintain your speed and direction so that the other vessel can steer itself around you. EMU25531
Other special situations There are three other rules you should be aware of when driving your boat around oth- er vessels. Narrow channels and bends When navigating in narrow channels, you should keep to the right when it is safe and practical to do so. If the operator of a power- driven vessel is preparing to go around a bend that may obstruct the view of other wa- ter vessels, the operator should sound a pro- longed blast on the whistle (4 to 6 seconds). If another vessel is around the bend, it too should sound the whistle. Even if no reply is heard, however, the vessel should still pro- ceed around the bend with caution. If you navigate such waters with your boat, you will need to carry a portable air horn, available from local marine supply stores. Fishing vessel right-of-way All vessels that are fishing with nets, lines or
6AG-9-3A-1E0.book 6
Safety information
7
trawls are considered to be fishing vessels under the International Rules. Vessels with trolling lines are not considered fishing ves- sels. Fishing vessels have the right-of-way regardless of position. Fishing vessels can- not, however, impede the passage of other vessels in narrow channels. Sailing vessel right-of-way Sailing vessels should normally be given the right-of-way. The exceptions to this are: 1. When the sailing vessel is overtaking the
power-driven vessel, the power-driven vessel has the right-of-way.
2. Sailing vessels should keep clear of any fishing vessel.
3. In a narrow channel, a sailing vessel should not hamper the safe passage of a power-driven vessel that can navigate only in such a channel.
Reading buoys and other markers The waters of the United States are marked for safe navigation by the lateral system of buoyage. Simply put, buoys and markers have an arrangement of shapes, colors, numbers and lights to show which side of the buoy a boater should pass on when navigat- ing in a particular direction. The markings on these buoys are oriented from the perspec- tive of being entered from seaward (the boat- er is going towards the port). This means that red buoys are passed on the starboard (right) side when proceeding from open wa- ter into port, and black buoys are to port (left) side. When navigating out of port, your posi- tion with respect to the buoys should be re- versed; red buoys should be to port and black buoys to starboard. Many bodies of water used by boaters are entirely within the boundaries of a particular state. The Uniform State Waterway Marking System has been devised for these waters.
This system uses buoys and signs with dis- tinctive shapes and colors to show regulatory or advisory information. These markers are white with black letters and orange boarders. They signify speed zones, restricted areas, danger areas, and general information. Remember, markings may vary by geo- graphic location. Always consult local boat- ing authorities before driving your boat in unfamiliar waters.
6AG-9-3A-1E0.book 7
Safety information
8
ZMU01708
6AG-9-3A-1E0.book 8
9
General information EMU25171
Identification numbers record EMU25184
Outboard motor serial number The outboard motor serial number is stamped on the label attached to the port side of the clamp bracket. Record your outboard motor serial number in the spaces provided to assist you in ordering spare parts from your Yamaha dealer or for reference in case your outboard motor is sto- len.
EMU25191
Key number If a main key switch is equipped with the mo- tor, the key identification number is stamped on your key as shown in the illustration. Record this number in the space provided for reference in case you need a new key.
1. Outboard motor serial number location
1. Outboard motor serial number location
1
ZMU05335
1
ZMU05336
1. Key number
6AG-9-3A-1E0.book 9
General information
10
EMU33523
Read manuals and labels Before operating or working on this outboard motor: Read this manual. Read any manuals supplied with the boat. Read all labels on the outboard motor and the boat. If you need any additional information, contact your Yamaha dealer. EMU33832
Warning labels If these labels are damaged or missing, contact your Yamaha dealer for replacements. F15, F20
ZMU07439
1 2
3
6AG-9-3A-1E0.book 10
General information
11
EMU33912
Contents of labels The above warning labels mean as follows. 1
WARNING EWM01691
Emergency starting does not have start- in-gear protection. Ensure shift control is in neutral before starting engine.
2
WARNING EWM01681
Keep hands, hair, and clothing away from rotating parts while the engine is running.
Do not touch or remove electrical parts when starting or during operation.
3
WARNING EWM01671
Read Owners Manuals and labels. Wear an approved personal flotation
device (PFD). Attach engine shut-off cord (lanyard) to
your PFD, arm, or leg so the engine stops if you accidentally leave the helm, which could prevent a runaway boat.
1 2
3
ZMU05740
6AG-9-3A-1E0.book 11
General information
12
EMU35132
Symbols The following symbols mean as follows.
Notice/Warning
Read Owners Manual
Hazard caused by continuous rotation
Electrical hazard
ZMU05696
ZMU05664
ZMU05665
ZMU05666
6AG-9-3A-1E0.book 12
13
Specifications and requirements EMU34521
Specifications TIP: (AL) stated in the specification data below represents the numerical value for the alumi- num propeller installed. Likewise, (SUS) represents the value for stainless steel propeller installed and (PL) for plastic propeller installed. EMU2821S
Dimension and weight: Overall length:
F15EHA 1048 mm (41.3 in) F15MHA 1048 mm (41.3 in) F15PHA 1048 mm (41.3 in) F20EA 663 mm (26.1 in) F20EHA 1048 mm (41.3 in) F20MHA 1048 mm (41.3 in) F20PA 663 mm (26.1 in) F20PHA 1048 mm (41.3 in)
Overall width: F15EHA 386 mm (15.2 in) F15MHA 386 mm (15.2 in) F15PHA 386 mm (15.2 in) F20EA 373 mm (14.7 in) F20EHA 386 mm (15.2 in) F20MHA 386 mm (15.2 in) F20PA 373 mm (14.7 in) F20PHA 386 mm (15.2 in)
Overall height S: F15EHA 1078 mm (42.4 in) F15MHA 1078 mm (42.4 in) F20EA 1078 mm (42.4 in) F20EHA 1078 mm (42.4 in) F20MHA 1078 mm (42.4 in) F20PA 1078 mm (42.4 in)
Overall height L: 1205 mm (47.4 in)
Motor transom height S: F15EHA 438 mm (17.2 in)
F15MHA 438 mm (17.2 in) F20EA 438 mm (17.2 in) F20EHA 438 mm (17.2 in) F20MHA 438 mm (17.2 in) F20PA 443 mm (17.4 in)
Motor transom height L: F15EHA 565 mm (22.2 in) F15MHA 565 mm (22.2 in) F15PHA 570 mm (22.4 in) F20EA 565 mm (22.2 in) F20EHA 565 mm (22.2 in) F20MHA 565 mm (22.2 in) F20PA 570 mm (22.4 in) F20PHA 570 mm (22.4 in)
Dry weight (AL) S: F15EHA 54 kg (119 lb) F15MHA 51 kg (112 lb) F20EA 52 kg (115 lb) F20EHA 54 kg (119 lb) F20MHA 51 kg (112 lb) F20PA 57 kg (126 lb)
Dry weight (AL) L: F15EHA 56 kg (123 lb) F15MHA 53 kg (117 lb) F15PHA 61 kg (134 lb) F20EA 54 kg (119 lb) F20EHA 56 kg (123 lb) F20MHA 53 kg (117 lb) F20PA 59 kg (130 lb) F20PHA 61 kg (134 lb)
Performance: Full throttle operating range:
50006000 r/min Rated power:
F15EHA 11.0 kW (15 HP) F15MHA 11.0 kW (15 HP) F15PHA 11.0 kW (15 HP) F20EA 14.7 kW (20 HP) F20EHA 14.7 kW (20 HP) F20MHA 14.7 kW (20 HP) F20PA 14.7 kW (20 HP)
6AG-9-3A-1E0.book 13
Specifications and requirements
14
F20PHA 14.7 kW (20 HP) Idle speed (in neutral):
1000-1100 r/min Power unit:
Type: 4-stroke SOHC L2 4valves
Total displacement: 362 cm3 (22.1 c.i.)
Bore stroke: 63.0 58.1 mm (2.48 2.29 in)
Ignition system: CDI
Spark plug (NGK): DPR6EB-9
Spark plug gap: 0.80.9 mm (0.0310.035 in)
Steering system: F15EHA Tiller handle F15MHA Tiller handle F15PHA Tiller handle F20EA Remote steering F20EHA Tiller handle F20MHA Tiller handle F20PA Remote steering F20PHA Tiller handle
Starting system: F15EHA Electric starter F15MHA Manual starter F15PHA Electric starter F20EA Electric starter F20EHA Electric starter F20MHA Manual starter F20PA Electric starter F20PHA Electric starter
Starting carburetion system: Prime start
Valve clearance IN (cold engine): 0.150.25 mm (0.00590.0098 in)
Valve clearance EX (cold engine): 0.250.35 mm (0.00980.0138 in)
Cold cranking amps (CCA/SAE): F15EHA 245433 A
F15PHA 245433 A F20EA 245433 A F20EHA 245433 A F20PA 245433 A F20PHA 245433 A
Marine cranking amps (MCA/ABYC): F15EHA 323520 A F15PHA 323520 A F20EA 323520 A F20EHA 323520 A F20PA 323520 A F20PHA 323520 A
Min. reserve capacity (RC/SAE): F15EHA 52 minutes F15PHA 52 minutes F20EA 52 minutes F20EHA 52 minutes F20PA 52 minutes F20PHA 52 minutes
Maximum generator output: 10 A
Lower unit: Gear shift positions:
Forward-neutral-reverse Gear ratio:
F15EHA 2.08(27/13) F15MHA 2.08(27/13) F15PHA 2.08 (27/13) F20EA 2.08(27/13) F20EHA 2.08(27/13) F20MHA 2.08(27/13) F20PA 2.08(27/13) F20PHA 2.08(27/13)
Trim and tilt system: F15EHA Manual tilt F15MHA Manual tilt F15PHA Power tilt F20EA Manual tilt F20EHA Manual tilt F20MHA Manual tilt F20PA Power tilt F20PHA Power tilt
6AG-9-3A-1E0.book 14
Specifications and requirements
15
Propeller mark: F15 J/J1 F20 J1
Fuel and oil: Recommended fuel:
Regular unleaded gasoline Min. pump octane number (PON):
86 Fuel tank capacity:
25 L (6.60 US gal, 5.50 Imp.gal) Recommended engine oil:
YAMALUBE 4M FC-W or 4-stroke outboard motor oil
Recommended engine oil grade 1: SAE 10W-30/10W-40/5W-30 API SE/SF/SG/SH/SJ/SL
Engine oil quantity (without oil filter re- placement):
1.6 L (1.69 US qt, 1.41 Imp.qt) Engine oil quantity (with oil filter replace- ment):
1.8 L (1.90 US qt, 1.58 Imp.qt) Lubrication system:
Wet sump Recommended gear oil:
Yamalube Marine Gearcase Lube or Hypoid gear oil
Recommended gear oil grade: SAE 90 API GL-4
Gear oil quantity: 0.250 L (0.264 US qt, 0.220 Imp.qt)
Tightening torque: Spark plug:
18 Nm (1.84 kgf-m, 13.3 ft-lb) Propeller nut:
17 Nm (1.73 kgf-m, 12.5 ft-lb) Engine oil drain bolt:
28 Nm (2.86 kgf-m, 20.7 ft-lb) Engine oil filter:
18 Nm (1.84 kgf-m, 13.3 ft-lb)
EMU33554
Installation requirements EMU33564
Boat horsepower rating
WARNING EWM01560
Overpowering a boat can cause severe instability.
Before installing the outboard motor(s), con- firm that the total horsepower of your out- board motor(s) does not exceed the boats maximum horsepower rating. See the boats capacity plate or contact the manufacturer. EMU33571
Mounting motor
WARNING EWM01570
Improper mounting of the outboard mo- tor could result in hazardous condi- tions such as poor handling, loss of control, or fire hazards.
Because the motor is very heavy, spe- cial equipment and training is required to mount it safely.
Your dealer or other person experienced in proper rigging should mount the motor using correct equipment and complete rigging in- structions. For further information, see page 37. EMU33581
Remote control requirements
WARNING EWM01580
If the engine starts in gear, the boat can move suddenly and unexpectedly, pos- sibly causing a collision or throwing passengers overboard.
If the engine ever starts in gear, the start-in-gear protection device is not working correctly and you should dis- continue using the outboard. Contact
6AG-9-3A-1E0.book 15
Specifications and requirements
16
your Yamaha dealer.
The remote control unit must be equipped with a start-in-gear protection device(s). This device prevents the engine from starting un- less it is in neutral. EMU25694
Battery requirements EMU25714
Specifications of Battery Use a fully charged battery that meets the following specifications. The engine cannot be started if battery voltage is too low.
NOTICE ECM01061
Do not use a battery that does not meet the specified capacity. If a battery that does not meet specifications is used, the
electric system could perform poorly or be overloaded, causing electric system damage.
EMU36290
Mounting battery Mount the battery holder securely in a dry, well-ventilated, vibration-free location in the boat. WARNING! Do not put flammable items, or loose heavy or metal objects in the same compartment as the battery. Fire, explosion or sparks could result. [EWM01820] EMU36300
Multiple batteries To connect multiple batteries, such as for multiple engine configurations or for an ac- cessory battery, consult your Yamaha dealer about battery selection and correct wiring. EMU25730
Without a rectifier or Rectifier Regulator
NOTICE ECM01090
A battery cannot be connected to models that do not have a rectifier or Rectifier Regulator.
If you wish to use a battery with the models without a rectifier or Rectifier Regulator, in- stall an optional Rectifier Regulator. Using a maintenance-free battery with the above models can shorten the life of the bat- tery significantly. Install an optional Rectifier Regulator or use accessories rated to withstand 18 volts or higher with the above models. Consult your Yamaha dealer for details on installing an optional Rectifier Regulator. EMU34195
Propeller selection Next to selecting an outboard motor, select- ing the right propeller is one of the most im-
Cold cranking amps (CCA/SAE):
F15EHA 245433 A F15PHA 245433 A F20EA 245433 A F20EHA 245433 A F20PA 245433 A F20PHA 245433 A
Marine cranking amps (MCA/ABYC):
F15EHA 323520 A F15PHA 323520 A F20EA 323520 A F20EHA 323520 A F20PA 323520 A F20PHA 323520 A
Min. reserve capacity (RC/SAE): F15EHA 52 minutes F15PHA 52 minutes F20EA 52 minutes F20EHA 52 minutes F20PA 52 minutes F20PHA 52 minutes
6AG-9-3A-1E0.book 16
Specifications and requirements
17
portant purchasing decisions a boater can make. The type, size, and design of your pro- peller have a direct impact on acceleration, top speed, fuel economy, and even engine life. Yamaha designs and manufactures pro- pellers for every Yamaha outboard motor and every application. Your outboard motor came with a Yamaha propeller selected to perform well over a range of applications, but there may be uses where a different propeller would be more appropriate. Your Yamaha dealer can help you select the right propeller for your boating needs. Select a propeller that will allow the engine to reach the middle or upper half of the operating range at full throttle with the maximum boat- load. Generally, select a larger pitch propel- ler for a smaller operating load and a smaller pitch propeller for a heavier load. If you carry loads that vary widely, select the propeller that lets the engine run in the proper range for your maximum load but