Yamaha EF3000iSE, EF3000iSEB Owner's Manual

To start the generator, ensure the fuel valve is turned on. Set the choke to the start position if the engine is cold. Turn the engine switch to "ON" and then pull the recoil starter or use the electric start if your model is equipped with it. Once the engine starts, gradually move the choke to the run position.
Use SAE 10W-30 or 10W-40 oil for general use. If operating in extreme temperatures, refer to the user manual for specific oil recommendations. Regularly check the oil level and change it as per the maintenance schedule.
Check if there is fuel in the tank and that the fuel valve is on. Ensure the oil level is adequate and the spark plug is functioning properly. Verify that the battery is charged for electric start models. If issues persist, consult the manual or contact a service professional.
Regular maintenance includes checking and changing the oil, cleaning or replacing the air filter, inspecting the spark plug, and checking fuel levels. Periodically inspect the unit for leaks or any loose parts. Follow the maintenance schedule in the user manual.
The EF3000iSEB does not support a 240V output. It only provides 120V output. Ensure all appliances are compatible with the 120V output before connecting them.
The Eco-Throttle feature automatically adjusts the engine speed to match the load, improving fuel efficiency and reducing noise. To use it, turn the Eco-Throttle switch to "ON" when operating with variable loads. It is not recommended for use with appliances requiring a constant power level.
To store the generator, empty the fuel tank and run the engine until it stops to empty the carburetor. Clean the generator and store it in a dry, well-ventilated area. Disconnect the battery for models with electric start if storing for extended periods.
If overloading occurs, reduce the load by unplugging appliances. Reset the circuit breaker if tripped. Ensure the total load does not exceed the generator’s rated output. If the problem persists, check the appliances for faults.
The EF3000iSEB does not support parallel operation. If you need more power, consider using a generator with a higher power output capacity.
Inspect the air filter every 50 hours of operation or more frequently in dusty environments. Clean it with soapy water and let it dry completely before reinstalling. Replace the air filter if it is damaged or excessively dirty.