Yamaha DD-55 Owner's Manual
![Yamaha DD-55 Drum Set manual cover](/images/mRjqwGChAXCpQbDqqHxnzkHG/thumbs/thumb175x175.webp)
To connect your Yamaha DD-55 to an external speaker system, use the 'AUX OUT' jack. Connect a standard 1/4 inch audio cable from the 'AUX OUT' jack to the input of your speaker system. Ensure the volume on both the DD-55 and the speaker system is adjusted to a safe level to avoid damage.
If the pads are not responding, first check the power connection and ensure the power is on. Next, inspect the cable connections to the pads. If the issue persists, perform a factory reset by turning off the unit, then holding down the 'Start/Stop' button while turning the power back on.
To adjust the sensitivity of the pads, use the 'Pad Control' settings. Press the 'Pad Assign' button, then use the 'Up/Down' buttons to select the pad you want to adjust. Use the 'Left/Right' buttons to change the sensitivity level.
Yes, you can use headphones with the Yamaha DD-55. Simply plug your headphones into the 'PHONES/OUTPUT' jack on the back of the unit. This will automatically mute the built-in speakers for quiet practice.
To store your Yamaha DD-55, keep it in a cool, dry place away from direct sunlight and extreme temperatures. Cover it with a cloth to prevent dust accumulation. Disconnect all cables and remove batteries if it won't be used for an extended period.
To change the drum kit sounds, press the 'Drum Kit' button, then use the 'Up/Down' buttons to scroll through the available kits. Once you find the desired kit, it will automatically be selected when you stop pressing the buttons.
Yes, you can connect the Yamaha DD-55 to a computer using a MIDI interface. Connect the MIDI OUT of the DD-55 to the MIDI IN of the interface, then connect the interface to your computer. Use compatible software to record the MIDI data.
If the sound is distorted, first check the volume levels. Ensure the volume is not set too high on the DD-55 or any connected amplifier. Also, verify that all cables are securely connected and not damaged. If distortion persists, consider resetting the unit to factory settings.
To perform a factory reset, turn off the DD-55. Press and hold the 'Start/Stop' button, then turn the unit back on while continuing to hold the button until the reset process begins. This will restore all settings to their original factory defaults.
Yes, you can use a foot pedal with the Yamaha DD-55. Connect the foot pedal to the 'FOOT PEDAL' jack on the back of the unit. The pedal can be used to control features such as the hi-hat or bass drum, depending on the pedal's configuration.