Yamaha CRX-N470 Owner's Manual

To connect your Yamaha CRX-N470 to a Wi-Fi network, press the 'Setup' button on the remote control, navigate to 'Network Settings', and select 'Wi-Fi Setup'. Follow the on-screen prompts to select your network and enter the password.
First, check that the speakers are properly connected and that the volume is turned up. Ensure the correct input source is selected. If there is still no sound, try resetting the receiver by unplugging it for a few minutes and then plugging it back in.
To perform a factory reset, turn off the unit. Press and hold the 'Stop' button on the main unit while pressing the 'Power' button. This will reset the system to its factory default settings.
Ensure the receiver is connected to the internet. Press 'Setup' on the remote, go to 'Network Settings', then select 'Firmware Update'. Follow the instructions to download and install the latest firmware.
Yes, you can stream music using Bluetooth. Enable Bluetooth on your phone, set the receiver to Bluetooth mode, and pair it with your phone. Once paired, you can stream music directly.
Use a soft, dry cloth to gently wipe the exterior of the receiver. Avoid using any harsh chemicals or abrasive materials. Ensure that the vents are clear of dust to maintain proper airflow.
Ensure your speakers are placed correctly and in an optimal position in the room. Use high-quality speaker cables and consider using external equalizers or sound processors for better sound quality.
Use an RCA cable to connect the audio output from your TV to the audio input on the receiver. Ensure the correct input source is selected on the CRX-N470 to hear the TV sound.
Network dropouts can be caused by weak Wi-Fi signals or interference. Try placing the receiver closer to the router, or use a wired Ethernet connection for a more stable connection.
To set up presets, tune to the desired radio station. Press and hold a preset button (1-6) on the remote until you hear a beep. The station is now saved to that preset button.