Yamaha CR2020 Owner's Manual

Pages 30

Year 0

Language(s)

of 30

Yamaha CR2020 Receiver Specification

The Yamaha CR-2020 Receiver is a vintage high-fidelity audio component renowned for its robust build and superior sound quality, making it a sought-after piece among audiophiles and collectors. This receiver, launched in the late 1970s, delivers a substantial power output of 105 watts per channel into 8 ohms, ensuring ample power to drive a wide range of speaker systems. Its design features a solid aluminum front panel with a comprehensive array of controls and inputs, reflecting the engineering prowess of its era.

The CR-2020 is equipped with a sophisticated FM/AM tuner section, offering precise tuning capabilities and excellent reception sensitivity, which is complemented by a high signal-to-noise ratio, ensuring clean and clear audio playback. The phono preamp section supports both moving magnet (MM) and moving coil (MC) cartridges, catering to vinyl enthusiasts with versatile turntable options.

In terms of connectivity, the CR-2020 offers multiple input options, including auxiliary, tape, and phono inputs, providing flexibility for various audio sources. It also includes pre-out and main-in jacks, allowing integration with external amplifiers or processors for expanded audio setups. The presence of high and low filters, along with a loudness control, enables users to tailor sound output to their preference, enhancing the listening experience.

The Yamaha CR-2020 is known for its exceptional build quality, utilizing discrete components and a well-designed internal layout to minimize distortion and maximize audio fidelity. Its aesthetic appeal, marked by a wooden cabinet and a brushed aluminum finish, coupled with its technical capabilities, makes the CR-2020 a timeless piece in the realm of vintage audio equipment.

Yamaha CR2020 Receiver F.A.Q.

How do I connect my Yamaha CR2020 Receiver to speakers?

To connect your Yamaha CR2020 Receiver to speakers, ensure the receiver is powered off. Connect the positive (red) and negative (black) terminals of the speakers to the corresponding terminals on the receiver. Ensure the impedance of the speakers matches the receiver's specifications.

What should I do if my Yamaha CR2020 Receiver is not turning on?

Check the power cord and ensure it is firmly plugged into a working outlet. Inspect the fuse and replace it if blown. If the problem persists, consult a professional technician for further diagnosis.

How can I clean and maintain my Yamaha CR2020 Receiver?

Regularly dust the exterior with a soft cloth. Use compressed air to clean the vents and internal components. Avoid using liquids or solvents. Ensure the receiver is unplugged during cleaning. Schedule professional servicing for thorough maintenance every few years.

Why is there no sound coming from my Yamaha CR2020 Receiver?

Ensure the speakers are properly connected and the volume is turned up. Check the input source to make sure it is correctly selected. Inspect cables for damage and replace if necessary. Perform a soft reset by turning off the receiver and unplugging it for a few minutes.

How do I reset the Yamaha CR2020 Receiver to factory settings?

The Yamaha CR2020 does not have a digital reset function. To reset settings, manually adjust the controls and settings to their default positions. Refer to the user manual for guidance on default settings.

Can I use Bluetooth with my Yamaha CR2020 Receiver?

The Yamaha CR2020 does not support Bluetooth natively. However, you can use an external Bluetooth adapter connected to the auxiliary input to stream audio wirelessly.

What is the correct procedure for replacing a fuse in the Yamaha CR2020 Receiver?

Turn off and unplug the receiver. Locate the fuse holder on the rear panel. Use a screwdriver to open the fuse holder cover. Remove the blown fuse and replace it with a new one of the same type and rating. Close the cover and plug in the receiver.

How do I adjust the bass and treble on my Yamaha CR2020 Receiver?

Use the Bass and Treble knobs located on the front panel of the receiver. Turn the Bass knob clockwise to increase bass and counterclockwise to decrease. Use the same method with the Treble knob to adjust the treble levels.

What are the common signs that my Yamaha CR2020 Receiver needs professional servicing?

Common signs include persistent sound distortion, unusual noises, overheating, or the receiver not turning on. If simple troubleshooting steps do not resolve these issues, consult a professional technician.

Is it possible to connect a turntable to the Yamaha CR2020 Receiver?

Yes, the Yamaha CR2020 Receiver has a phono input specifically designed for connecting a turntable. Ensure the turntable has a built-in preamp or use an external preamp if necessary. Connect the turntable's output cables to the phono input on the receiver.